Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPV 101-73 CELANESE USA
Santoprene™
Fitness equipment、Automotive Applications、Electrical applications、Application in the automo、packing、Pipe fittings、Home appliance components、Consumer product applicat、Parts under the hood of a、Outdoor applications、Washer、Electrical components、diaphragm
High temperature resistan、Aging resistance、Flame retardant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | CELANESE USA/101-73 |
|---|---|---|---|
| Shore Hardness | 邵氏A,15秒,23°C | ISO868 | 78 |
| Electrical performance | Test Condition | Test Method | CELANESE USA/101-73 |
|---|---|---|---|
| High voltage arc ignition resistance index | PLC | UL746 | PLC6 |
| High arc combustion index (HAI) | HAI | UL746 | PLC 0 |
| DielectricConstant | 23°C,1.98mm | IEC60250 | 2.50 |
| Hot wire ignition (HWI) | 1.5mm | UL746 | PLC 3 |
| dielectric strength | 23°C,2.00mm | ASTMD149 | 27 KV/mm |
| DielectricConstant | 23°C,1.98mm | ASTMD150 | 2.50 |
| High Voltage Arc Traceability Rate (HVTR) | HVTR | UL746 | PLC 1 |
| Hot wire ignition (HWI) | 3.0mm | UL746 | PLC 3 |
| Compared to the Leakage Tracking Index (CTI) | CTI | UL746 | PLC 0 |
| Hot wire ignition (HWI) | 1.0mm | UL746 | PLC 4 |
| flammability | Test Condition | Test Method | CELANESE USA/101-73 |
|---|---|---|---|
| UL flame retardant rating | 1.0mm | UL94 | HB |
| 3.0mm | UL94 | HB | |
| 1.5mm | UL94 | HB |
| physical property | Test Condition | Test Method | CELANESE USA/101-73 |
|---|---|---|---|
| DetergentResistance | ISO188 | f4 | |
| UL749 | f3 | ||
| Outdoor applicability | UL746C | f1 |
| elastomer | Test Condition | Test Method | CELANESE USA/101-73 |
|---|---|---|---|
| Tensile stress transverse flow rate | 100%应变,23°C | ASTMD412 | 3.60 Mpa |
| Tearing Strength (MD) | 23°C | ASTMD624 | 27.0 kN/m |
| CompressionSet4 | 125°C,70hr | ASTMD395B | 37 % |
| Tensile stress transverse flow rate | 100%应变,23°C | ISO37 | 3.60 Mpa |
| Tensile Elongation(Across Flow) | 断裂,23°C | ISO37 | 490 % |
| Compression permanent deformation 4 | 125°C,70hr | ISO815 | 37 % |
| Tensile strength - transverse flow rate | 断裂,23°C | ASTMD412 | 8.80 Mpa |
| CompressionSet4 | 70°C,22hr | ASTMD395B | 28 % |
| Compression permanent deformation 4 | 70°C,22hr | ISO815 | 28 % |
| tensile strength | Break,23°C | ISO37 | 8.80 Mpa |
| TearStrength-AcrossFlow3 | 23°C | ISO34-1 | 27 kN/m |
| Tensile Elongation(Across Flow) | 断裂,23°C | ASTMD412 | 490 % |
| aging | Test Condition | Test Method | CELANESE USA/101-73 |
|---|---|---|---|
| Change rate of tensile strength | 100°C,168hr,inIRM903Oil | ASTMD471 | -30 % |
| 23°C,168hr,inCyclohexane | ASTMD471 | 31 % | |
| 125°C,70hr,inIRM903Oil | ISO1817 | -31 % | |
| Changes in tensile stress during fracture | 23°C,168hr,inSulfuricAcid,98% | ISO1817 | -27 % |
| Change rate of hardness of hardness tester 2 | ShoreA,100°C,168hr,inIRM903Oil | ASTMD471 | -21 |
| Changes in tensile stress during fracture | 23°C,168hr,inTrichloroethylene | ISO1817 | 22 % |
| Change in Mass | 23°C,168hr,inMethylethylketone | ASTMD471 | -24 % |
| Change rate of tensile strength | 23°C,168hr,inSodiumChloride,15% | ISO1817 | 0.0 % |
| Change in Mass | 125°C,168hr,inIRM903Oil | ISO1817 | 78 % |
| Change rate of ultimate elongation | 125°C,70hr,inIRM903Oil | ASTMD471 | -47 % |
| Change rate of tensile strength | 100°C,168hr,inDeionizedWater | ASTMD471 | 1.0 % |
| Change rate of ultimate elongation | 23°C,168hr,inSodiumHydroxide,50% | ASTMD471 | 2.0 % |
| Change in Mass | 23.0°C,168hr,inTrichloroethylene | ISO1817 | -6.0 % |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inIsopropylAlcohol | ASTMD471 | -1.0 |
| Change rate of ultimate elongation | 23°C,168hr,inTrichloroethylene | ASTMD471 | 22 % |
| Changes in tensile stress during fracture | 23°C,168hr,inHydrochloricAcid,10% | ISO1817 | 9.0 % |
| Change rate of ultimate elongation | 23°C,168hr,inIsopropylAlcohol | ASTMD471 | 20 % |
| Changes in tensile stress during fracture | 23°C,168hr,inSodiumChloride,15% | ISO1817 | -2.0 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inSodiumHydroxide,50% | ISO1817 | 0.0 |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inCyclohexane | ASTMD471 | -16 |
| ShoreA,23°C,168hr,inDetergent(Tide),2.5% | ASTMD471 | 0.0 | |
| Change in Mass | 125°C,168hr,inIRM903Oil | ASTMD471 | 78 % |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inSulfuricAcid,98% | ASTMD471 | 0.0 |
| Change in Mass | 23°C,168hr,inTrichloroethylene | ASTMD471 | -6.0 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inEthanol,95% | ISO1817 | 0.0 |
| Change in Mass | 23.0°C,168hr,inSodiumHydroxide,50% | ISO1817 | -0.20 % |
| Change rate of ultimate elongation | 23°C,168hr,inMethylethylketone | ASTMD471 | 24 % |
| Change rate of tensile strength | 23°C,168hr,inEthanol,95% | ISO1817 | -2.0 % |
| 23°C,168hr,inEthanol,95% | ASTMD471 | -2.0 % | |
| 23°C,168hr,inAceticAcid | ASTMD471 | -8.0 % | |
| Changes in tensile stress during fracture | 23°C,168hr,inIsopropylAlcohol | ISO1817 | 20 % |
| 23°C,168hr,inCyclohexane | ISO1817 | 20 % | |
| ChangeinShoreHardnessinAir | ShoreA,150°C,168hr | ISO188 | 7.0 |
| Changes in tensile stress during fracture | 23°C,168hr,inMethylethylketone | ISO1817 | 24 % |
| Change in Mass | 23.0°C,168hr,inEthanol,95% | ISO1817 | -0.10 % |
| Change rate of tensile strength in air | 150°C,168hr | ASTMD573 | -1.0 % |
| volume change | 125°C,70hr,在IRM903油中 | ISO1817 | 72 % |
| Change rate of tensile strength | 23°C,168hr,inSodiumHydroxide,50% | ASTMD471 | 3.0 % |
| ChangeinDurometerHardnessAir | ShoreA,150°C,168hr | ASTMD573 | 7.0 |
| Change rate of tensile strength | 125°C,70hr,inIRM903Oil | ASTMD471 | -31 % |
| 125°C,168hr,inIRM903Oil | ASTMD471 | -31 % | |
| Change in Mass | 23°C,168hr,inAceticAcid | ASTMD471 | 4.0 % |
| 23°C,168hr,inSodiumChloride,15% | ASTMD471 | 0.20 % | |
| 23.0°C,168hr,inMethylethylketone | ISO1817 | -24 % | |
| Change rate of tensile strength | 125°C,168hr,inIRM903Oil | ISO1817 | -31 % |
| Change rate of ultimate elongation | 125°C,168hr,inIRM903Oil | ASTMD471 | -58 % |
| Changes in tensile stress during fracture | 23°C,168hr,inDetergent(Tide),2.5% | ISO1817 | 2.0 % |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inEthanol,95% | ASTMD471 | 0.0 |
| ShoreA,23°C,168hr,inSodiumChloride,15% | ASTMD471 | 0.0 | |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inHydrochloricAcid,10% | ISO1817 | -3.0 |
| Change rate of ultimate elongation | 23°C,168hr,inHydrochloricAcid,10% | ASTMD471 | 9.0 % |
| Change rate of tensile strength | 23°C,168hr,inSulfuricAcid,98% | ISO1817 | -17 % |
| Change rate of ultimate elongation | 23°C,168hr,inCyclohexane | ASTMD471 | 20 % |
| Change rate of tensile strength | 23°C,168hr,inSodiumHydroxide,50% | ISO1817 | 3.0 % |
| Change rate of ultimate elongation | 100°C,168hr,inIRM903Oil | ASTMD471 | -49 % |
| Change rate of tensile strength | 100°C,168hr,inDeionizedWater | ISO1817 | 1.0 % |
| Change in Mass | 23.0°C,168hr,inAceticAcid | ISO1817 | 4.0 % |
| Change rate of tensile strength | 23°C,168hr,inDetergent(Tide),2.5% | ASTMD471 | 3.0 % |
| Changes in tensile stress during fracture | 125°C,70hr,inIRM903Oil | ISO1817 | -47 % |
| Change rate of tensile strength in air | 150°C,168hr | ISO188 | -1.0 % |
| Change rate of hardness of hardness tester 2 | ShoreA,100°C,168hr,inDeionizedWater | ASTMD471 | -2.0 |
| Change in Mass | 100°C,168hr,inIRM903Oil | ASTMD471 | 66 % |
| Change rate of ultimate elongation | 100°C,168hr,inDeionizedWater | ASTMD471 | -7.0 % |
| Change in Mass | 23.0°C,168hr,inSulfuricAcid,98% | ISO1817 | 3.6 % |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inAceticAcid | ASTMD471 | -2.0 |
| Change in Mass | 23°C,168hr,inSulfuricAcid,98% | ASTMD471 | 3.6 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inCyclohexane | ISO1817 | -16 |
| Change in Mass | 23.0°C,168hr,inSodiumChloride,15% | ISO1817 | 0.20 % |
| Change rate of tensile strength | 23°C,168hr,inHydrochloricAcid,10% | ISO1817 | 13 % |
| Change rate of ultimate elongation | 23°C,168hr,inEthanol,95% | ASTMD471 | 0.0 % |
| 23°C,168hr,inAceticAcid | ASTMD471 | -4.0 % | |
| Change rate of tensile strength | 23°C,168hr,inTrichloroethylene | ISO1817 | 54 % |
| Changes in tensile stress during fracture | 23°C,168hr,inAceticAcid | ISO1817 | -4.0 % |
| Change in Mass | 23°C,168hr,inEthanol,95% | ASTMD471 | -0.10 % |
| Change rate of ultimate elongation | 23°C,168hr,inDetergent(Tide),2.5% | ASTMD471 | 2.0 % |
| ChangeinShoreHardness | ShoreA,100°C,168hr,inDeionizedWater | ISO1817 | -2.0 |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inTrichloroethylene | ASTMD471 | -3.0 |
| Change rate of tensile strength | 23°C,168hr,inIsopropylAlcohol | ASTMD471 | 31 % |
| Change in Mass | 23°C,168hr,inSodiumHydroxide,50% | ASTMD471 | -0.20 % |
| Change rate of tensile strength | 23°C,168hr,inTrichloroethylene | ASTMD471 | 54 % |
| Change in Mass | 23.0°C,168hr,inDetergent(Tide),2.5% | ISO1817 | 0.60 % |
| Change rate of tensile strength | 23°C,168hr,inMethylethylketone | ASTMD471 | 47 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inSulfuricAcid,98% | ISO1817 | 0.0 |
| Change rate of ultimate elongation | 23°C,168hr,inSodiumChloride,15% | ASTMD471 | -2.0 % |
| Change rate of tensile strength | 100°C,168hr,inIRM903Oil | ISO1817 | -30 % |
| 23°C,168hr,inAceticAcid | ISO1817 | -8.0 % | |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inIsopropylAlcohol | ISO1817 | -1.0 |
| Changes in tensile stress during fracture | 100°C,168hr,inIRM903Oil | ISO1817 | -49 % |
| Change in Mass | 23.0°C,168hr,inHydrochloricAcid,10% | ISO1817 | 0.20 % |
| 23.0°C,168hr,inCyclohexane | ISO1817 | -4.9 % | |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inMethylethylketone | ISO1817 | 0.0 |
| Change in Mass | 100°C,168hr,inIRM903Oil | ISO1817 | 66 % |
| Change rate of tensile strength | 23°C,168hr,inSulfuricAcid,98% | ASTMD471 | -17 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inDetergent(Tide),2.5% | ISO1817 | 0.0 |
| Change in Mass | 100°C,168hr,inDeionizedWater | ASTMD471 | 3.6 % |
| Changes in tensile stress during fracture | 100°C,168hr,inDeionizedWater | ISO1817 | -7.0 % |
| ChangeinShoreHardness | ShoreA,125°C,168hr,inIRM903Oil | ISO1817 | -23 |
| Change in Mass | 23°C,168hr,inHydrochloricAcid,10% | ASTMD471 | 0.20 % |
| Change rate of hardness of hardness tester 2 | ShoreA,125°C,168hr,inIRM903Oil | ASTMD471 | -23 |
| Change rate of ultimate elongation | 23°C,168hr,inSulfuricAcid,98% | ASTMD471 | -27 % |
| Changes in tensile stress during fracture | 23°C,168hr,inSodiumHydroxide,50% | ISO1817 | 2.0 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inAceticAcid | ISO1817 | -2.0 |
| Change rate of ultimate elongation in air | 150°C,168hr | ASTMD573 | -3.0 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inTrichloroethylene | ISO1817 | -3.0 |
| Change rate of tensile strength | 23°C,168hr,inDetergent(Tide),2.5% | ISO1817 | 3.0 % |
| 23°C,168hr,inHydrochloricAcid,10% | ASTMD471 | 13 % | |
| Changes in tensile stress during fracture | 23°C,168hr,inEthanol,95% | ISO1817 | 0.0 % |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inMethylethylketone | ASTMD471 | 0.0 |
| Change rate of tensile strength | 23°C,168hr,inMethylethylketone | ISO1817 | 47 % |
| 23°C,168hr,inSodiumChloride,15% | ASTMD471 | 0.0 % | |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inHydrochloricAcid,10% | ASTMD471 | -3.0 |
| Change in Mass | 23°C,168hr,inCyclohexane | ASTMD471 | -4.9 % |
| ChangeinShoreHardness | ShoreA,23°C,168hr,inSodiumChloride,15% | ISO1817 | 0.0 |
| ShoreA,100°C,168hr,inIRM903Oil | ISO1817 | -21 | |
| Change rate of hardness of hardness tester 2 | ShoreA,23°C,168hr,inSodiumHydroxide,50% | ASTMD471 | 0.0 |
| Change in Mass | 100°C,168hr,inDeionizedWater | ISO1817 | 3.6 % |
| Changes in tensile stress during fracture | 125°C,168hr,inIRM903Oil | ISO1817 | -58 % |
| Change in Mass | 23°C,168hr,inDetergent(Tide),2.5% | ASTMD471 | 0.60 % |
| Change rate of tensile strength | 23°C,168hr,inIsopropylAlcohol | ISO1817 | 31 % |
| 23°C,168hr,inCyclohexane | ISO1817 | 31 % | |
| Change in Mass | 23.0°C,168hr,inIsopropylAlcohol | ISO1817 | -13 % |
| volume change | 125°C,70hr,在IRM903油中 | ASTMD471 | 72 % |
| Change in Mass | 23°C,168hr,inIsopropylAlcohol | ASTMD471 | -13 % |
| Thermal performance | Test Condition | Test Method | CELANESE USA/101-73 |
|---|---|---|---|
| brittle temperature | ISO812 | -60.0 °C | |
| RTI Str | 1.5mm | UL746 | 90.0 °C |
| RTI Elec | UL746 | 90.0 °C | |
| brittle temperature | ASTMD746 | -60.0 °C | |
| RTI Str | 3.0mm | UL746 | 95.0 °C |
| 1.0mm | UL746 | 90.0 °C |
Contact Us
Get App
Top