Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

POM FB-2025 CELANESE USA
Amcel®
Vehicle electronics,Electronic appliances,Automotive sector
High rigidity,Low warpage,Filler: Glass beads
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | CELANESE USA/FB-2025 |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 115 °C |
Melting temperature | ISO 11357-3 | 165 °C |
mechanical properties | Test Condition | Test Method | CELANESE USA/FB-2025 |
---|---|---|---|
Bending modulus | 23°C | ISO 178 | 3500 Mpa |
bending strength | 23°C | ISO 178 | 93.0 Mpa |
Nominal tensile fracture strain | ISO 527-2 | 4.8 % | |
tensile strength | ISO 527-2/50 | 60.0 Mpa |
Electrical performance | Test Condition | Test Method | CELANESE USA/FB-2025 |
---|---|---|---|
Surface resistivity | IEC 60093 | 1E+16 ohms | |
Volume resistivity | IEC 60093 | 1E+16 ohms·cm |
Physical properties | Test Condition | Test Method | CELANESE USA/FB-2025 |
---|---|---|---|
density | ISO 1183 | 1.59 g/cm³ | |
melt mass-flow rate | 190°C/2.16kg | ISO 1133 | 9.0 g/10min |
Shrinkage rate | MD1:3.00mm | Internal Method | 1.5 % |
Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.20 % |
impact performance | Test Condition | Test Method | CELANESE USA/FB-2025 |
---|---|---|---|
Charpy Notched Impact Strength | 23°C | ISO 179 | 2.8 kJ/m² |