Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Polyarylate U-polymer AXG-1500-30 UNITIKA JAPAN
--
--
Filler, glass fiber reinforced material, 30%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | UNITIKA JAPAN/U-polymer AXG-1500-30 |
|---|---|---|---|
| Rockwell hardness | R-Scale | 121 -- |
| thermal performance | Test Condition | Test Method | UNITIKA JAPAN/U-polymer AXG-1500-30 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | °C | 179 -- |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 4.6E-05 -- |
| mechanical properties | Test Condition | Test Method | UNITIKA JAPAN/U-polymer AXG-1500-30 |
|---|---|---|---|
| Bending modulus | MPa | 8200 6300 | |
| bending strength | MPa | 211 181 | |
| compressive strength | MPa | 147 -- | |
| elongation | Break | % | 4.0 6.0 |
| tensile strength | MPa | 143 112 |
| Electrical performance | Test Condition | Test Method | UNITIKA JAPAN/U-polymer AXG-1500-30 |
|---|---|---|---|
| Arc resistance | sec | 60.0 -- | |
| Dielectric constant | 1MHz | 3.60 -- | |
| Dielectric strength | kV/mm | 30 -- | |
| Dissipation factor | 1MHz | 0.040 -- | |
| Volume resistivity | ohms·cm | -- 1E+14 |
| Physical properties | Test Condition | Test Method | UNITIKA JAPAN/U-polymer AXG-1500-30 |
|---|---|---|---|
| density | g/cm³ | 1.41 -- | |
| Shrinkage rate | TD:3.00mm | % | 0.70 -- |
| MD:3.00mm | % | 0.35 -- | |
| Water absorption rate | 24hr,3.18mm | % | 0.26 -- |
| impact performance | Test Condition | Test Method | UNITIKA JAPAN/U-polymer AXG-1500-30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 3.18mm | J/m | 76 100 |