Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LLDPE Ferro PE JPE65HJ01BK USA Fulu
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | USA Fulu/Ferro PE JPE65HJ01BK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 460 J/m |
| Mechanical properties | Test Condition | Test Method | USA Fulu/Ferro PE JPE65HJ01BK |
|---|---|---|---|
| Flexural modulus | 正切:23°C | ASTM D790 | 200 MPa |
| 1%正割:23°C | ASTM D790 | 186 MPa | |
| bending strength | 屈服,23°C | ASTM D790 | 5.34 MPa |
| tensile strength | 屈服,23°C | ASTM D638 | 6.89 MPa |
| elongation | 断裂,23°C | ASTM D638 | 340 % |
| physical property | Test Condition | Test Method | USA Fulu/Ferro PE JPE65HJ01BK |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 1.5 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 6.0 g/10min |
| density | ASTM D792 | 1.84 g/cm³ | |
| Shrinkage rate | TD | ASTM D955 | 1.6 % |
| Thermal performance | Test Condition | Test Method | USA Fulu/Ferro PE JPE65HJ01BK |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 19.4 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 21.1 °C |
Contact Us
Get App
Top