plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA66 AKV35 000000 ENVALIOR WUXI
Durethan® 
--
Filler: Glass fiber reinf,35% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodENVALIOR WUXI/AKV35 000000
Hot deformation temperature0.45MPaUnannealedISO 75-2/Bf250 °C
1.80MPaAnnealedISO 75-2/Af250 °C
Linear coefficient of thermal expansionTDISO 11359-21E-04 cm/cm/°C
MDISO 11359-22E-05 cm/cm/°C
Vicat softening temperatureMelting TemperatureISO 11357-3263 °C
mechanical propertiesTest ConditionTest MethodENVALIOR WUXI/AKV35 000000
Bending modulus23°CISO 17810000 Mpa
bending strength23°CISO 178300 Mpa
Charpy Notched Impact Strength-30°CISO 179/1eA10 kJ/m²
23°CISO 179/1eA15 kJ/m²
Elongation at Break23°CISO 527-23.00 %
Impact strength of cantilever beam gap-40°CISO 180/1A<10 kJ/m²
-30°CISO 180/1A<10 kJ/m²
Impact strength of simply supported beam without notch-30°CISO 179/1eU75 kJ/m²
23°CISO 179/1eU90 kJ/m²
Tensile modulus23°CISO 527-211200 Mpa
tensile strength23°CISO 527-2200 Mpa
flame retardant performanceTest ConditionTest MethodENVALIOR WUXI/AKV35 000000
Extreme Oxygen IndexISO 4589-223 %
Ignition temperature of heating wire2.00mmIEC 60695-2-12600 °C
UL flame retardant ratingUL -94HB 3.20mm
UL -94HB 1.60mm
Electrical performanceTest ConditionTest MethodENVALIOR WUXI/AKV35 000000
Dielectric constant相对漏电起痕指数IEC 60112600 V
23°CIEC 602504.00 100HZ
23°CIEC 602504.00 1MHz
Dielectric strength1.00mmIEC 60243-140 KV/mm
Surface resistivityIEC 600931E+14 Ω.cm
Volume resistivityIEC 600931E+15 Ω.cm
Physical propertiesTest ConditionTest MethodENVALIOR WUXI/AKV35 000000
Shrinkage rateTD3.0mmISO 294-41.40 %
MD3.0mmISO 294-40.32 %
Water absorption rate(23°C,50RH)ISO 621.80 %