Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 VESTAMID® E E40-S3 Altuglas International of Arkema Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® E E40-S3 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| 23°C | ISO 179/1eU | NoBreak | |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | NoBreak |
| -30°C | ISO 179/1eA | NoBreak |
| hardness | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® E E40-S3 |
|---|---|---|---|
| Shore hardness | 邵氏D | ISO 868 | 40 |
| Electrical performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® E E40-S3 |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 35 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+11 ohms·cm | |
| relative permittivity | 23°C,1MHz | IEC 60250 | 4.90 |
| 23°C,100Hz | IEC 60250 | 7.50 | |
| Surface Resistivity | IEC 60093 | 1E+13 ohms | |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 0 |
| Dissipation Factor | 23°C,100Hz | IEC 60250 | 0.070 |
| 23°C,1MHz | IEC 60250 | 0.12 |
| Mechanical properties | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® E E40-S3 |
|---|---|---|---|
| tensile strength | -- | ISO 527-2 | 17.0 MPa |
| Tensile modulus | ISO 527-2 | 80.0 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >200 % |
| tensile strength | 50%应变 | ISO 527-2 | 9.50 MPa |
| Tensile creep modulus | 1000hr | ISO 899-1 | 60.0 MPa |
| flammability | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® E E40-S3 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® E E40-S3 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.70to1.3 % |
| MD | ISO 294-4 | 0.60to0.90 % | |
| viscosity number | ISO 307 | 190 cm³/g | |
| Water absorption rate | 饱和,23°C | ISO 62 | 1.0 % |
| density | ISO 1183 | 1.01 g/cm³ |
| Thermal performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® E E40-S3 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 2.4E-04 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 55.0 °C |
| Linear coefficient of thermal expansion | TD：23to55°C | ISO 11359-2 | 2.1E-04 cm/cm/°C |
| vicat | -- | ISO 306/B | 60.0 °C |
| -- | ISO 306/A | 125 °C |
Contact Us
Get App
Top