Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Y101H TPC SINGAPORE
COSMOPLENE®
Electrical components
Thermal stability、High mobility
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | TPC SINGAPORE/Y101H |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 15 g/10min | |
| density | ASTM D-792 | 0.90 g/cm |
| Mechanical properties | Test Condition | Test Method | TPC SINGAPORE/Y101H |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 2.5 kg·cm/cm(J/M)ft·lb/in | |
| tensile strength | 断裂 | ASTM D-638 | 34.3 Mpa |
| elongation | 断裂 | ASTM D-638 | 650 % |
| Impact strength of cantilever beam gap | ASTM D-256 | 2.5 kj/cm | |
| Flexural modulus | ASTM D790/ISO 178 | 1420 kg/cm²(MPa)[Lb/in²] | |
| ASTM D-747 | 1420 Mpa | ||
| Rockwell hardness | ASTM D785 | - | |
| tensile strength | ASTM D638/ISO 527 | - kg/cm²(MPa)[Lb/in²] |
| other | Test Condition | Test Method | TPC SINGAPORE/Y101H |
|---|---|---|---|
| purpose | 注塑级 |
| Physical properties | Test Condition | Test Method | TPC SINGAPORE/Y101H |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 0.9 | |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 15 g/10min |
| Thermal performance | Test Condition | Test Method | TPC SINGAPORE/Y101H |
|---|---|---|---|
| Heat distortion temperature | HDT | ASTM D648/ISO 75 | 120 ℃（℉） |
| melting temperature | 165 °C |
Contact Us
Get App
Top