Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PP Retpol® PDR 7413/6 UV3 7A13 POLYPACIFIC AUSTRALIA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® PDR 7413/6 UV3 7A13 |
|---|---|---|---|
| Impact strength of cantilever beam gap | -30°C,3.00mm | ASTM D256 | 90 J/m |
| 0°C,3.00mm | ASTM D256 | 440 J/m | |
| 23°C,3.00mm | ASTM D256 | 560 J/m |
| hardness | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® PDR 7413/6 UV3 7A13 |
|---|---|---|---|
| Shore hardness | 邵氏D,15秒,3.00mm | ASTM D2240 | 57 |
| 邵氏D,3.00mm | ASTM D2240 | 66 | |
| Rockwell hardness | R级,3.00mm | ASTM D785 | 52 |
| Mechanical properties | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® PDR 7413/6 UV3 7A13 |
|---|---|---|---|
| tensile strength | 3.00mm | ASTM D638 | 18.0 MPa |
| elongation | 断裂,3.00mm | ASTM D638 | 470 % |
| Flexural modulus | 3.00mm | ASTM D790 | 1080 MPa |
| physical property | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® PDR 7413/6 UV3 7A13 |
|---|---|---|---|
| Shrinkage rate | MD：3.00mm | ASTM D955 | 0.90to1.2 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 20 g/10min |
| density | ASTM D792 | 0.938 g/cm³ |
| Thermal performance | Test Condition | Test Method | POLYPACIFIC AUSTRALIA/Retpol® PDR 7413/6 UV3 7A13 |
|---|---|---|---|
| Linear coefficient of thermal expansion | MD：-30到30°C,3.00mm | ASTM D696 | 8E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,3.00mm，HDT | ASTM D648 | 103 °C |
Contact Us
Get App
Top