Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PBT SEF-515X MITSUBISHI ENGINEERING JAPAN
NOVADURAN™
Bottle cap,Fitness equipment,Vehicle electronics
Glass fiber reinforced,Flame retardant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| machinability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/SEF-515X |
|---|---|---|---|
| Dry conditions | 热风干燥 120℃---5-8小时 140℃---约4小时 | ||
| Mold temperature | 80-100 °C | ||
| Processing temperature | 250 °C | ||
| Screw speed | 80-120 rpm |
| thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/SEF-515X |
|---|---|---|---|
| Combustibility (rate) | UL 94 | V-0 | |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 4.E-05 mm/mm.℃ |
| mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/SEF-515X |
|---|---|---|---|
| Bending modulus | ASTM D790/ISO 178 | 6300 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 123 kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 3 % | |
| Tensile modulus | ASTM D638/ISO 527 | 6400 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/SEF-515X |
|---|---|---|---|
| Dielectric constant | ASTM D150/IEC 60250 | 3.6 | |
| Surface resistivity | ASTM D257/IEC 60093 | 1.E+15 Ω | |
| Volume resistivity | ASTM D257/IEC 60093 | 1.E+14 Ω.cm |
| Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/SEF-515X |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.44 | |
| Shrinkage rate | ASTM D955 | 0.4 % | |
| Water absorption rate | ASTM D570/ISO 62 | 0.08 % |