Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PPA UC008H-BKNAT SABIC INNOVATIVE US
LNP™ THERMOCOMP™
Mechanical parts,consumer goods
Thermal stability,Carbon fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/UC008H-BKNAT |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed,3.20mm | ASTM D648 | >249 °C |
| 1.8MPa,Unannealed,64.0mmSpan | ISO 75-2/Af | >250 °C |
| mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/UC008H-BKNAT |
|---|---|---|---|
| Bending modulus | ISO 178 | 26600 Mpa | |
| ASTM D790 | 26800 Mpa | ||
| bending strength | ASTM D790 | 441 Mpa | |
| ISO 178 | 425 Mpa | ||
| elongation | Break | ASTM D638 | 1.0 % |
| Tensile modulus | ISO 527-2/1 | 35500 Mpa | |
| ASTM D638 | 33800 Mpa | ||
| Tensile strain | Break | ISO 527-2 | 1.3 % |
| tensile strength | Break | ASTM D638 | 261 Mpa |
| Break | ISO 527-2 | 232 Mpa |
| Electrical performance | Test Condition | Test Method | SABIC INNOVATIVE US/UC008H-BKNAT |
|---|---|---|---|
| Surface resistivity | ASTM D257 | 1.0E+2to1.0E+4 ohms | |
| Volume resistivity | ASTM D257 | 1.0E+2to1.0E+4 ohms·cm |
| Physical properties | Test Condition | Test Method | SABIC INNOVATIVE US/UC008H-BKNAT |
|---|---|---|---|
| Shrinkage rate | TD:24hr | ASTM D955 | 0.70-0.90 % |
| TD:24hr | ISO 294-4 | 0.70-0.90 % | |
| MD:24hr | ASTM D955 | 0.70-0.90 % | |
| MD:24hr | ISO 294-4 | 0.70-0.90 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.46to1.4 % |
| 24hr,50%RH | ASTM D570 | 0.40 % |
| impact performance | Test Condition | Test Method | SABIC INNOVATIVE US/UC008H-BKNAT |
|---|---|---|---|
| Dart impact | 23°C,EnergyatPeakLoad | ASTM D3763 | 7.00 J |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 7.3 kJ/m² |
| Multi axis Instrumented Impact Energy | ISO 6603-2 | 5.00 J | |
| Suspended wall beam without notch impact strength | 23°C | ISO 180/1U | 45 kJ/m² |