Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PAI 4310 USA Suwei
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Basic performance | Test Condition | Test Method | USA Suwei/4310 |
|---|---|---|---|
| Water absorption rate | 24小时 | ASTM D570 | 0.28 % |
| density | ASTM D792 | 1.47 g/cm3 |
| Mechanical properties | Test Condition | Test Method | USA Suwei/4310 |
|---|---|---|---|
| compressive strength | ASTM D695 | 166 MPa | |
| Compression Modulus | ASTM D695 | 5.3 MPa | |
| shear strength | 23℃ | ASTM D732 | 112 MPa |
| Impact strength of cantilever beam gap | 无缺口 3.2mm | ASTM D256 | 404 J/m |
| elongation at break | 23℃ | ASTM D1708 | 7 % |
| Flexural modulus | 23℃ | ASTM D790 | 6900 MPa |
| Poisson's ratio | 0.39 | ||
| Tensile modulus | 23℃ | ASTM D790 | 6600 MPa |
| tensile strength | 23℃ | ASTM D1708 | 163 MPa |
| bending strength | 23℃ | ASTM D790 | 215 MPa |
| Impact strength of cantilever beam gap | （缺口）3.2mm | ASTM D256 | 64 J/m |
| Thermal performance | Test Condition | Test Method | USA Suwei/4310 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa，HDT | ASTM D648 | 279 ℃ |
| Linear coefficient of thermal expansion | ASTM D696 | 25.2 ppm/°C | |
| Limiting Oxygen Index | ASTM D2863 | 44 % | |
| UL flame retardant rating | UL 94 | V-0 |
Contact Us
Get App
Top