Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PAEK PEKK Plus® KK827H-BK Polymics, Ltd.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Polymics, Ltd./PEKK Plus® KK827H-BK |
|---|---|---|---|
| Rockwell hardness | M-Scale | ASTM D785 | 95 |
| thermal performance | Test Condition | Test Method | Polymics, Ltd./PEKK Plus® KK827H-BK |
|---|---|---|---|
| Glass transition temperature | ASTME1356 | 177 °C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 191 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 3.6E-05 cm/cm/°C |
| Melting temperature | DSC | 360 °C | |
| thermal conductivity | ASTMC177 | 0.25 W/m/K |
| mechanical properties | Test Condition | Test Method | Polymics, Ltd./PEKK Plus® KK827H-BK |
|---|---|---|---|
| Bending modulus | ASTM D790 | 4100 MPa | |
| bending strength | ASTM D790 | 172 MPa | |
| elongation | Break | ASTM D638 | 30 % |
| Tensile modulus | ASTM D638 | 4100 MPa | |
| tensile strength | ASTM D638 | 110 MPa |
| Electrical performance | Test Condition | Test Method | Polymics, Ltd./PEKK Plus® KK827H-BK |
|---|---|---|---|
| Dielectric constant | ASTM D150 | 3.30 | |
| Dielectric strength | ASTM D149 | 240 kV/mm | |
| Dissipation factor | ASTM D150 | 4E-03 | |
| Surface resistivity | ASTM D257 | 5.1 ohms | |
| Volume resistivity | ASTM D257 | 2.5 ohms·cm |
| Physical properties | Test Condition | Test Method | Polymics, Ltd./PEKK Plus® KK827H-BK |
|---|---|---|---|
| density | ASTM D792 | 1.30 g/cm³ | |
| Shrinkage rate | MD | ASTM D955 | 1.0 % |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.15 % |
| impact performance | Test Condition | Test Method | Polymics, Ltd./PEKK Plus® KK827H-BK |
|---|---|---|---|
| Impact strength of cantilever beam gap | 0.318mm | ASTM D256 | 4.0 J/m |