Material Comparison

Product Info

Product Name

Brand Name

Usages

Properties

Certificates

TPV 101-87 CELANESE USA

Santoprene™

household electrical appliances,Automotive Applications,Electrical applications,Consumer product application field,Pipe fittings,diaphragm,Home appliance components,Application in the automotive field,Movable hinge,Outdoor applications,Parts under the hood of a car,Electrical components

Aging resistance,High impact resistance

Plastic Datasheets

hardness	Test Condition	Test Method	CELANESE USA/101-87
Shore hardness	ShoreA,15Sec,23°C	ISO 868	93

thermal performance	Test Condition	Test Method	CELANESE USA/101-87
Brittle temperature		ASTMD746	-54.0 °C
RTI	1.0mm	UL 746	90.0 °C
		1.5mm	UL 746	90.0 °C
		3.0mm	UL 746	95.0 °C
RTI Elec		UL 746	90.0 °C

Electrical performance	Test Condition	Test Method	CELANESE USA/101-87
Compared to the anti leakage trace index	CTI	UL 746	PLC 0
Dielectric constant	23°C,1.98mm	ASTMD150	2.60
Dielectric strength	23°C,2.00mm	ASTM D149	30 KV/mm
High arc combustion index	HAI	UL 746	PLC 0
High voltage arc tracing rate	PLC	UL 746
High voltage arc tracing rate		HVTR	UL 746	PLC 1
Hot wire ignition	1.0mm	UL 746	PLC 4
		3.0mm	UL 746	PLC 2
		1.5mm	UL 746	PLC 3

Physical properties	Test Method	CELANESE USA/101-87
Outdoor applicability	UL 746C	f1
Resistance to cleaning agents	ISO 188	f4
Resistance to cleaning agents		UL 749	f3

flammability	Test Condition	Test Method	CELANESE USA/101-87
UL flame retardant rating	3.0mm	UL 94	HB
		1.0mm	UL 94	HB
		1.5mm	UL 94	HB

aging	Test Condition	Test Method	CELANESE USA/101-87
Change rate of hardness (Shore) in the air	ShoreA,150°C,168hr	ASTMD573	2.0
Change rate of tensile strength in air	150°C,168hr	ASTMD573	-15 %
Change rate of tensile strength in air		125°C,70hr,在IRM903油中	ASTMD471	-29 %
Change rate of ultimate elongation in air	125°C,70hr,在IRM903油中	ASTMD471	-32 %
Change rate of ultimate elongation in air		150°C,168hr	ASTMD573	-16 %
Continuous use temperature	1008hr	自定标准	135 °C
Volume change	125°C,70hr,在IRM903油中	ASTMD471	48 %

elastomer	Test Condition	Test Method	CELANESE USA/101-87
elongation	Break,23°C，Across Flow	ASTMD412	580 %
Permanent compression deformation	125°C,70hr5	ASTM D395B	44 %
		70°C,22hr6	ISO 815	36 %
		125°C,70hr6	ISO 815	44 %
		70°C,22hr5	ASTM D395B	36 %
tear strength	23°C4，横向Flow	ISO 34-1	52 kN/m
tear strength		23°C3，横向Flow	ASTM D624	52.0 kN/m
tensile strength	Break,23°C，横向Flow	ASTMD412	15.0 Mpa
Tensile stress	100%Strain,23°C，横向Flow	ASTMD412	7.10 Mpa

Get App

Top