Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

AES SE20 UMG JAPAN
DIALAC®
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | UMG JAPAN/SE20 |
|---|---|---|---|
| Rockwell hardness | ISO 2039-2 | 107 R |
| thermal performance | Test Condition | Test Method | UMG JAPAN/SE20 |
|---|---|---|---|
| Hot deformation temperature | 1.80MPaAnnealed | ISO 75-2/Af | 82 °C |
| 1.80MPa,Unannealed | ISO 75-2/Af | 82.0 °C | |
| Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 0.000090 cm/cm/℃ |
| MD | ISO 11359-2 | 9E-05 cm/cm/°C | |
| UL flame retardant rating | 1.50mm | UL 94 | HB |
| mechanical properties | Test Condition | Test Method | UMG JAPAN/SE20 |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 2600 Mpa |
| 23℃ | ISO 178 | 2600 Mpa | |
| bending strength | 23°C | ISO 178 | 76 Mpa |
| 23℃ | ISO 178 | 76.0 Mpa | |
| Charpy Notched Impact Strength | -30℃ | ISO 179 | 5.0 kJ/m² |
| -30°C | ISO 179/1eA | 5.0 kJ/m² | |
| 23°C | ISO 179/1eA | 13 kJ/m² | |
| Rockwell hardness | 23℃ | ISO 2039-2 | 107 R 计秤 |
| Tensile modulus | 23℃ | ISO 527-2 | 2350 Mpa |
| 23°C | ISO 527-2 | 2350 Mpa | |
| tensile strength | 23℃ | ISO 527-2 | 47.0 Mpa |
| 23°C | ISO 527-2 | 47 Mpa |
| Electrical performance | Test Condition | Test Method | UMG JAPAN/SE20 |
|---|---|---|---|
| Dielectric strength | IEC 60243-1 | 32 KV/mm | |
| Volume resistivity | IEC 60093 | 1E+15 Ω.cm |
| Physical properties | Test Condition | Test Method | UMG JAPAN/SE20 |
|---|---|---|---|
| melt mass-flow rate | 220℃/10Kg | ISO 1133 | 11.00 cm3/10min |
| Melt Volume Flow Rate (MVR) | 220℃/2.16 kg | ISO 1133 | 11.0 cm3/10min |
| Shrinkage rate | MD,23℃ | ISO 294-4 | 0.60 - 0.80 % |
| MD2.0mm | ISO 294-4 | 0.70 % |
| flammability | Test Condition | Test Method | UMG JAPAN/SE20 |
|---|---|---|---|
| UL flame retardant rating | UL -94 | HB 1.50mm | |
| UL -94 | HB 3.00mm |