plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 B30S LANXESS BELGIUM
Durethan® 
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodLANXESS BELGIUM/B30S
Hot deformation temperature1.8 MPa1.80 MPaISO 75-1/266 °C
0.45 MPa0.45 MPaISO 75-1/2172 °C
Melting temperature10℃ / min10 ℃/minISO 11357-1221 °C
mechanical propertiesTest ConditionTest MethodLANXESS BELGIUM/B30S
Bending modulus2 mm/mim2 mm/minISO 1782800 Mpa
Bending strain2 mm/min2 mm/minISO 1786 %
bending strength2 mm/min2 mm/minISO 178105 Mpa
3.50% Strain,2 mm/min3.5%,2 mm/minISO 17890 Mpa
Tensile modulus1 mm/min1 mm/minISO 527-13200 Mpa
Tensile stress50 mm/min50 mm/min,YieldISO 527-180 Mpa
Physical propertiesTest ConditionTest MethodLANXESS BELGIUM/B30S
densityISO 11831122 g/cm³
Shrinkage rate正常,60x60x2,270℃ / WZ 80℃,600 bar正常,60x60x2; 270 °C / WZ 80 °C; 600 barISO 25770.91 %
平行,60x60x2; 120 ℃; 4 h平行,60x60x2; 120 °C; 4 hISO 25770.27 %
MD:60x60x2,270℃ / WZ 80℃,600 bar平行,60x60x2; 270 °C / WZ 80 °C; 600 barISO 25771.03 %
正常,60x60x2; 120 ℃; 4 h正常,60x60x2; 120 °C; 4 hISO 25770.27 %
impact performanceTest ConditionTest MethodLANXESS BELGIUM/B30S
Charpy Notched Impact Strength23℃23 °CISO 179-1eUN kJ/m²
23℃23 °CISO 179-1eA<10 kJ/m²
-30℃-30 °CISO 179-1eA<10 kJ/m²
Impact strength of cantilever beam gap23℃23 °CISO 180-1A<10
-30℃-30 °CISO 180-1A<10
-30℃-30 °CISO 180-1U200 kJ/m²
23℃23 °CISO 180-1UN kJ/m²