Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC 4610-10 STYRON TAIWAN
--
--
transparent、Middle flow、 Medium liquidity、transparent、 Medium liquidity、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | STYRON TAIWAN/4610-10 |
|---|---|---|---|
| Glow wire combustion index (GWFI) | 2.0mm | IEC 695-2-1 | 960 °C |
| Basic performance | Test Condition | Test Method | STYRON TAIWAN/4610-10 |
|---|---|---|---|
| density | ASTM D-792 | 1200 kg/m | |
| melt mass-flow rate | 300℃/1.2kg | ASTM D-1238 | 10 g/10min |
| Mechanical properties | Test Condition | Test Method | STYRON TAIWAN/4610-10 |
|---|---|---|---|
| tensile strength | 断裂 | ASTM D-638 | 66 Mpa |
| elongation | 断裂 | ASTM D-638 | 120 % |
| tensile strength | 屈服 | ASTM D-638 | 61 Mpa |
| elongation at yield | ASTM D-638 | 6 % | |
| Tensile modulus | ASTM D-638 | 2240 Mpa | |
| Flexural modulus | ASTM D-790 | 2400 Mpa | |
| bending strength | ASTM D-790 | 100 Mpa | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 900 J/m |
| Suspended wall beam without notch impact strength | 23℃ | ASTM D-256 | 未破裂 |
| physical property | Test Condition | Test Method | STYRON TAIWAN/4610-10 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-2 |
| Shrinkage rate | ASTM D-955 | 0.005-0.007 mm/mm | |
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| Thermal performance | Test Condition | Test Method | STYRON TAIWAN/4610-10 |
|---|---|---|---|
| Heat distortion temperature | 退火@1.82MPa，HDT | ASTM D-648 | 140 °C |
| 未退火@1.82MPa，HDT | ASTM D-648 | 127 °C | |
| Ball indentation temperature | IEC 598-1 | ＞125 °C | |
| Heat distortion temperature | 退火@0.45MPa，HDT | ASTM D-648 | 144 °C |
| Shrinkage rate | 50℃/小时，50n重 | ASTM D-1525 | 154 °C |
Contact Us
Get App
Top