Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPA HTN54G35HSLR NC010 DUPONT USA
Zytel®
Electronic and Electrical
Thermal stability、enhance、Filler: Glass fiber reinf、35% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | DUPONT USA/HTN54G35HSLR NC010 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 12 kJ/m² |
| Impact strength of simply supported beam without notch | 23°C | ISO 179/1eU | 75 kJ/m² |
| Charpy Notched Impact Strength | -40°C | ISO 179/1eA | 9.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | DUPONT USA/HTN54G35HSLR NC010 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | IEC 60112 | PLC 0 | |
| dielectric strength | IEC 60243-1 | 43 KV/mm | |
| Surface Resistivity | IEC 60093 | -- ohms |
| Mechanical properties | Test Condition | Test Method | DUPONT USA/HTN54G35HSLR NC010 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 10000 Mpa | |
| Tensile creep modulus | 1hr | ISO 899-1 | -- Mpa |
| Tensile strain | 断裂 | ISO 527-2 | 3.0 % |
| Flexural modulus | ISO 178 | 9000 Mpa | |
| Tensile creep modulus | 1000hr | ISO 899-1 | -- Mpa |
| tensile strength | 断裂 | ISO 527-2 | 180 Mpa |
| Poisson's ratio | ISO 527 | 0.38 |
| flammability | Test Condition | Test Method | DUPONT USA/HTN54G35HSLR NC010 |
|---|---|---|---|
| FMVSS flammability | FMVSS302 | SE |
| physical property | Test Condition | Test Method | DUPONT USA/HTN54G35HSLR NC010 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.60 % |
| MD | ISO 294-4 | 0.20 % | |
| density | ISO 1183 | 1.42 g/cm³ |
| Thermal performance | Test Condition | Test Method | DUPONT USA/HTN54G35HSLR NC010 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 300 °C | |
| Linear coefficient of thermal expansion | TD：-- | ISO 11359-2 | 7.2E-05 cm/cm/°C |
| MD：-40to23°C | ISO 11359-2 | 2E-05 cm/cm/°C | |
| TD：-40to23°C | ISO 11359-2 | 7.5E-05 cm/cm/°C | |
| MD：-- | ISO 11359-2 | 2E-05 cm/cm/°C | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 285 °C |
| Linear coefficient of thermal expansion | TD：导热系数 | ISO 11359-2 | 0.35 W/m/K |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 255 °C |
Contact Us
Get App
Top