Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PEEK VESTAKEEP® Ultimate Altuglas International of Arkema Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAKEEP® Ultimate |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C,完全断裂 | ISO 179/1eA | 9.0 kJ/m² |
| Impact strength of simply supported beam without notch | -30°C,完全断裂 | ISO 179/1eU | NoBreak |
| 23°C,完全断裂 | ISO 179/1eU | NoBreak | |
| Charpy Notched Impact Strength | -30°C,完全断裂 | ISO 179/1eA | 8.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAKEEP® Ultimate |
|---|---|---|---|
| dielectric strength | IEC 60243-1 | 16 kV/mm | |
| relative permittivity | 50Hz | IEC 60250 | 2.80 |
| Compared to the Leakage Tracking Index (CTI) | SolutionA5 | IEC 60112 | PLC 3 |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| relative permittivity | 1MHz | IEC 60250 | 2.80 |
| Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 3 |
| Surface Resistivity | IEC 60093 | 1E+14 ohms |
| Mechanical properties | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAKEEP® Ultimate |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 3400 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | 40 % |
| 屈服 | ISO 527-2 | 5.0 % | |
| tensile strength | 屈服 | ISO 527-2 | 95.0 MPa |
| flammability | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAKEEP® Ultimate |
|---|---|---|---|
| Hot filament ignition temperature | 2.0mm | IEC 60695-2-13 | 850 °C |
| UL flame retardant rating | 3.2mm | UL 94 | V-0 |
| Burning wire flammability index | 2.0mm | IEC 60695-2-12 | 960 °C |
| physical property | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAKEEP® Ultimate |
|---|---|---|---|
| Shrinkage rate | MD:180°C,2.00mm | ISO 294-4 | 0.90 % |
| Melt volume flow rate | 380°C/5.0kg | ISO 1133 | 7.00 cm³/10min |
| Shrinkage rate | TD:180°C,2.00mm | ISO 294-4 | 1.1 % |
| density | ISO 1183 | 1.30 g/cm³ |
| Thermal performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAKEEP® Ultimate |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 340 °C | |
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 6E-05 cm/cm/°C |
| vicat | -- | ISO 306/B | 305 °C |
| -- | ISO 306/A | 335 °C |
Contact Us
Get App
Top