Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Kingfa JH710 G30 Kingfa
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Kingfa/Kingfa JH710 G30 |
|---|---|---|---|
| Rockwell hardness | ASTM D785 | 86 M（Scale） |
| Electrical performance | Test Condition | Test Method | Kingfa/Kingfa JH710 G30 |
|---|---|---|---|
| Surface Resistivity | ASTM D257 | 1E+16 Ω.cm | |
| Volume resistivity | ASTM D257 | 1E+16 Ω.cm | |
| dielectric strength | ASTM D149 | 20 KV/mm |
| Mechanical properties | Test Condition | Test Method | Kingfa/Kingfa JH710 G30 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 170 MPa |
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 100 J/m |
| tensile strength | 23°C | ASTM D638 | 115 MPa |
| Impact strength of cantilever beam gap | -30°C | ASTM D256 | 90 J/m |
| Flexural modulus | 23°C | ASTM D790 | 8900 MPa |
| elongation at break | 23°C | ASTM D638 | 7.0 % |
| Flame retardant performance | Test Condition | Test Method | Kingfa/Kingfa JH710 G30 |
|---|---|---|---|
| UL flame retardant rating | UL -94 | V-0 1.50mm | |
| UL -94 | V-0 3.00mm |
| physical property | Test Condition | Test Method | Kingfa/Kingfa JH710 G30 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D995 | 0.20-0.30 % |
| density | ASTM D792 | 1.43 g/cm³ |
| Thermal performance | Test Condition | Test Method | Kingfa/Kingfa JH710 G30 |
|---|---|---|---|
| Heat distortion temperature | 1.80MPa未退火，HDT | ASTM D648 | 134 °C |
| 0.45MPa未退火，HDT | ASTM D648 | 148 °C |
Contact Us
Get App
Top