Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA/PP HT RNP43MU(xx)NA USA Fulu
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | USA Fulu/HT RNP43MU(xx)NA |
|---|---|---|---|
| Suspended wall beam without notch impact strength | 23℃ | ASTM D-256 | 1300 J/m |
| bending strength | 23℃，屈服 | ASTM D-790 | 243 MPa |
| tensile strength | 23℃ | ASTM D-638 | 130 MPa |
| Flexural modulus | 1% 正割 : 23℃ | ASTM D-790 | 8850 MPa |
| 正切 : 23℃ | ASTM D-790 | 8940 MPa | |
| Impact strength of cantilever beam gap | 23℃ | ASTM D-256 | 180 J/m |
| elongation at break | 23℃，断裂 | ASTM D-638 | 25 % |
| physical property | Test Condition | Test Method | USA Fulu/HT RNP43MU(xx)NA |
|---|---|---|---|
| density | ASTM D-792 | 1.34 g/cm³ | |
| Shrinkage rate | TD | ASTM D-955 | 1.4 % |
| melt mass-flow rate | 230℃/2.16 kg | ASTM D-1238 | 5.5 g/10 min |
| Shrinkage rate | MD | ASTM D-955 | 0.4 % |
| Thermal performance | Test Condition | Test Method | USA Fulu/HT RNP43MU(xx)NA |
|---|---|---|---|
| Heat distortion temperature | 1.8 MPa, 未退火，HDT | ASTM D-648 | 252 ℃ |
Contact Us
Get App
Top