Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

TPEE HTR8223 BK320 DUPONT USA
Hytrel®
Automotive Applications,Cable,Blow molding applications
High temperature resistan,Chemical resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | DUPONT USA/HTR8223 BK320 |
---|---|---|---|
Shore hardness | ShoreD | ISO 868 | 42 |
ShoreD,15Sec | ISO 868 | 38 |
thermal performance | Test Condition | Test Method | DUPONT USA/HTR8223 BK320 |
---|---|---|---|
Brittle temperature | ISO 974 | -100 °C | |
Effective thermal diffusivity coefficient | 5.44E-08 m²/s | ||
Glass transition temperature | ISO 11357-2 | -50.0 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 1.7E-04 cm/cm/°C |
MD | ISO 11359-2 | 1.7E-04 cm/cm/°C | |
Melting temperature | ISO 11357-3 | 195 °C |
mechanical properties | Test Condition | Test Method | DUPONT USA/HTR8223 BK320 |
---|---|---|---|
Bending modulus | ISO 178 | 79.0 Mpa | |
Nominal tensile fracture strain | ISO 527-2 | 680 % | |
Tensile modulus | ISO 527-2 | 75.0 Mpa | |
Tensile strain | Break | ISO 527-2 | >300 % |
tensile strength | 5.0%Strain | ISO 527-2 | 3.50 Mpa |
50%Strain | ISO 527-2 | 10.0 Mpa | |
10%Strain | ISO 527-2 | 5.50 Mpa | |
100%Strain | ISO 527-2 | 13.0 Mpa | |
300%Strain | ISO 527-2 | 19.0 Mpa | |
Break | ISO 527-2 | 26.0 Mpa | |
Wear resistance | ISO 4649 | 22.0 mm³ |
Electrical performance | Test Condition | Test Method | DUPONT USA/HTR8223 BK320 |
---|---|---|---|
Compared to the anti leakage trace index | IEC 60112 | V | |
Dielectric strength | IEC 60243-1 | 18 KV/mm | |
Dissipation factor | 1MHz | IEC 60250 | 0.013 |
100Hz | IEC 60250 | 7E-03 | |
Surface resistivity | IEC 60093 | 2E+14 ohms | |
Volume resistivity | IEC 60093 | 9E+12 ohms·cm |
Physical properties | Test Condition | Test Method | DUPONT USA/HTR8223 BK320 |
---|---|---|---|
MediumDensity | 0.980 g/cm³ | ||
melt mass-flow rate | 230°C/10.0kg | ISO 1133 | 9.5 g/10min |
Melt Volume Flow Rate (MVR) | 230°C/10.0kg | ISO 1133 | 10.0 cm3/10min |
Shrinkage rate | MD | ISO 294-4 | 1.6 % |
TD | ISO 294-4 | 1.6 % | |
Water absorption rate | Equilibrium,23°C,2.00mm,50%RH | ISO 62 | 0.20 % |
23°C,24hr | ISO 62 | 0.60 % | |
Saturation,23°C,2.00mm | ISO 62 | 0.80 % |
flammability | Test Condition | Test Method | DUPONT USA/HTR8223 BK320 |
---|---|---|---|
Burning rate | 1.00mm | ISO 3795 | <100 mm/min |
FMVSS flammability | FMVSS302 | B |
elastomer | Test Condition | Test Method | DUPONT USA/HTR8223 BK320 |
---|---|---|---|
tear strength | 横向Flow | ISO 34-1 | 130 kN/m |
Flow | ISO 34-1 | 120 kN/m |