Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM EB-08 JAPAN POLYPLASTIC
DURACON®
household electrical appl、Automotive Applications
High temperature resistan、wear resistant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodJAPAN POLYPLASTIC/EB-08
Charpy Notched Impact Strength23°CISO 179/1eA2.6 kJ/m²
Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/EB-08
ColorNumberCD3501
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/EB-08
Rockwell hardnessM级ISO 2039-295
Mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/EB-08
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72184000 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721860 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218320 10^-8mm³/N·m
Tensile modulusISO 527-23200 Mpa
coefficient of friction与钢-动态3JISK72180.50
bending strengthISO 17893.0 Mpa
coefficient of frictionDynamic2JISK72180.39
Tensile strain断裂ISO 527-24.0 %
Flexural modulusISO 1782950 Mpa
tensile strength ISO 527-255.0 Mpa
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/EB-08
Surface Resistivity内部方法5E+02 ohms
Volume resistivity内部方法5E+02 ohms·cm
physical property Test ConditionTest MethodJAPAN POLYPLASTIC/EB-08
Melt volume flow rate190°C/2.16kgISO 11331.20 cm3/10min
Shrinkage rateMD:2.00mmISO 294-42.0 %
Water absorption rate23°C,24hrISO 620.70 %
densityISO 11831.42 g/cm³
melt mass-flow rate190°C/2.16kgISO 11331.5 g/10min
Shrinkage rateTD:2.00mmISO 294-41.8 %
Thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/EB-08
Linear coefficient of thermal expansionTD：23to55°C内部方法1.1E-04 cm/cm/°C
MD：23到55°C内部方法1.1E-04 cm/cm/°C
Heat distortion temperature1.8MPa,未退火，HDTISO 75-2/A95.0 °C

Contact Us

Get App

Top