Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PCT Thermx® CGT33 CELANESE USA
--
--
Filler, glass fiber reinforced material, 30%, filler by weight,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| thermal performance | Test Condition | Test Method | CELANESE USA/Thermx® CGT33 |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 250 °C |
| Linear coefficient of thermal expansion | TD | ISO 11359-2 | 9E-05 cm/cm/°C |
| MD | ISO 11359-2 | 4.8E-05 cm/cm/°C | |
| Melting temperature | ISO 11357-3 | 285 °C |
| mechanical properties | Test Condition | Test Method | CELANESE USA/Thermx® CGT33 |
|---|---|---|---|
| Bending modulus | 23°C | ISO 178 | 7600 MPa |
| bending strength | 23°C | ISO 178 | 180 MPa |
| Tensile modulus | ISO 527-2/1A/1 | 8400 MPa | |
| Tensile strain | Break | ISO 527-2/1A/5 | 2.8 % |
| tensile strength | Break | ISO 527-2/1A/5 | 110 MPa |
| Electrical performance | Test Condition | Test Method | CELANESE USA/Thermx® CGT33 |
|---|---|---|---|
| Dielectric strength | IEC 60243-1 | 35 kV/mm |
| Physical properties | Test Condition | Test Method | CELANESE USA/Thermx® CGT33 |
|---|---|---|---|
| density | ISO 1183 | 1.44 g/cm³ | |
| Shrinkage rate | MD | ISO 294-4 | 0.30 % |
| TD | ISO 294-4 | 0.80 % | |
| Water absorption rate | Equilibrium,23°C,50%RH | ISO 62 | 0.15 % |
| Saturation,23°C | ISO 62 | 1.4 % |
| impact performance | Test Condition | Test Method | CELANESE USA/Thermx® CGT33 |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 10 kJ/m² |
| Impact strength of cantilever beam gap | 23°C | ISO 180/1A | 10 kJ/m² |
| flammability | Test Condition | Test Method | CELANESE USA/Thermx® CGT33 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | HB |