Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6/ABS 1120 B1 USA TPC
--
--
Additives, impact modifier properties, high impact resistance appearance, available color forms, particles
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Mechanical properties | Test Condition | Test Method | USA TPC/1120 B1 |
|---|---|---|---|
| elongation | 屈服 | ASTM D638 | 110 % |
| Suspended wall beam without notch impact strength | 3.18 mm | ASTM D256 | 无断裂 |
| Flexural modulus | ASTM D790 | 2070 MPa | |
| Impact strength of cantilever beam gap | 23°C, 3.18 mm | ASTM D256 | 750 J/m |
| tensile strength | 屈服 | ASTM D638 | 41.4 MPa |
| bending strength | ASTM D790 | 65.5 MPa | |
| Rockwell hardness | R级 | ASTM D785 | 105 |
| Electrical performance | Test Condition | Test Method | USA TPC/1120 B1 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 2E+13 ohm·cm | |
| dielectric strength | ASTM D149 | 17 kV/mm |
| physical property | Test Condition | Test Method | USA TPC/1120 B1 |
|---|---|---|---|
| Shrinkage rate | MD (3.18 mm) | ASTM D955 | 0.90 % |
| Water absorption rate | 24 hr | ASTM D570 | 1.5 % |
| density | ASTM D792 | 1.06 g/cm³ |
| Thermal performance | Test Condition | Test Method | USA TPC/1120 B1 |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa, 未退火，HDT | ASTM D648 | 166 °C |
| 1.8 MPa, 未退火，HDT | ASTM D648 | 51.7 °C | |
| Linear coefficient of thermal expansion | 流动 | ASTM D696 | 9.9E-05 cm/cm/°C |
Contact Us
Get App
Top