Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PAS RTP 1607 RTP US
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | RTP US/RTP 1607 |
---|---|---|---|
Impact strength of cantilever beam gap | 3.18mm | ASTM D256 | 100 J/m |
Suspended wall beam without notch impact strength | 3.18mm | ASTM D4812 | 690 J/m |
Mechanical properties | Test Condition | Test Method | RTP US/RTP 1607 |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 1.3 % |
bending strength | 屈服 | ASTM D790 | 214 MPa |
Tensile modulus | ASTM D638 | 11000 MPa | |
Flexural modulus | ASTM D790 | 10300 MPa | |
tensile strength | 屈服 | ASTM D638 | 155 MPa |
Electrical performance | Test Condition | Test Method | RTP US/RTP 1607 |
---|---|---|---|
Volume resistivity | ASTM D257 | 1E+16 ohms·cm | |
dielectric strength | ASTM D149 | 16 kV/mm | |
Dissipation Factor | 1MHz | ASTM D150 | 8E-03 |
dielectric constant | 1MHz | ASTM D150 | 4.30 |
flammability | Test Condition | Test Method | RTP US/RTP 1607 |
---|---|---|---|
UL flame retardant rating | UL 94 | V-0 |
physical property | Test Condition | Test Method | RTP US/RTP 1607 |
---|---|---|---|
Shrinkage rate | MD | ASTM D955 | 0.10to0.20 % |
Water absorption rate | 23°C,24hr | ASTM D570 | 0.28 % |
density | ASTM D792 | 1.68 g/cm³ |
Thermal performance | Test Condition | Test Method | RTP US/RTP 1607 |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 216 °C |
Contact Us
Get App
Top