Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
HDPE HD12BK Malaysia ETILINAS
--
Used for manufacturing pressure pipes and fittings, for drinking water, drainage, sewage treatment, and slurry pipelines
Good resistance to environmental stress cracking and wear resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | Malaysia ETILINAS/HD12BK |
|---|---|---|---|
| Oxidation induction time (OIT) | 200℃ | ISO TR10837 | ＞40 min |
| 210℃ | ISO TR10837 | ＞20 min |
| Basic performance | Test Condition | Test Method | Malaysia ETILINAS/HD12BK |
|---|---|---|---|
| density | 退火 | ISO 1872/1 | 953 kg/m |
| melt mass-flow rate | 190℃/5.0kg | ISO 1133: Condition 18 | 0.58 g/10min |
| density | ISO 1183 | 951 kg/m | |
| Carbon black content | ISO 6964 | 2.25 % |
| Mechanical properties | Test Condition | Test Method | Malaysia ETILINAS/HD12BK |
|---|---|---|---|
| Minimum Required Strength (MRS) | MRS | ISO TR9080(97.5% LCL) | 8.0 MPa |
| Tensile stress | ISO R527:Type 2 | 23 MPa | |
| elongation | 断裂 | ISO R527:Type 2 | ＞600 % |
| Flexural modulus | ISO 178 | 850 MPa | |
| Environmental stress cracking resistance | F0 | ASTM D-1693B | ＞1000 Hours |
| Electrical performance | Test Condition | Test Method | Malaysia ETILINAS/HD12BK |
|---|---|---|---|
| Volume resistivity | Ω.cm | BS 2782:230 A ＞10 |
| Thermal performance | Test Condition | Test Method | Malaysia ETILINAS/HD12BK |
|---|---|---|---|
| vicat | ISO 306 A | 120 ℃ | |
| thermal conductivity | W/m℃ | BS 874(at 23℃) 0.4 | |
| brittle temperature | ASTM D-746 | ＜-70 ℃ | |
| Linear coefficient of thermal expansion | ASTM D-696(20-60℃) | 1.5×10 ℃ |
Contact Us
Get App
Top