Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA610 QFL-4036 SABIC INNOVATIVE US
LNP™ LUBRICOMP™ 
Electronic and Electrical、Fitness equipment
Thermal stability、Conductive、Glass fiber reinforced
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodSABIC INNOVATIVE US/QFL-4036
Suspended wall beam without notch impact strength23°CASTM D4812940 J/m
23°C4ISO 180/1U65 kJ/m²
Dart impact--ISO 6603-23.19 J
23°C,EnergyatPeakLoadASTM D37638.50 J
Mechanical propertiesTest ConditionTest MethodSABIC INNOVATIVE US/QFL-4036
elongation断裂ASTMD6382.6 %
bending strength--ASTM D790221 Mpa
Tensile modulus--3ASTM D63811000 Mpa
coefficient of frictionStaticASTM D3702Modified0.52
Flexural modulus--ISO 1789700 Mpa
Wear factorWasherASTM D3702Modified15.0 10^-10in^5-min/ft-lb-hr
tensile strength 断裂ASTM D638149 Mpa
断裂ISO 527-2150 Mpa
bending strength--ISO 178228 Mpa
coefficient of frictionDynamicASTM D3702Modified0.71
Tensile modulus--ISO 527-2/19800 Mpa
Flexural modulus--ASTM D7908480 Mpa
physical property Test ConditionTest MethodSABIC INNOVATIVE US/QFL-4036
Shrinkage rateMD:24小时ISO 294-40.17 %
Water absorption rate24hr,50%RHASTM D5700.14 %
Shrinkage rateTD:24小时ASTM D9550.70 %
Water absorption rate平衡,23°C,50%RHISO 620.22 %
Shrinkage rateTD:24小时ISO 294-40.70 %
MD:24小时ASTM D9550.20 %
Thermal performanceTest ConditionTest MethodSABIC INNOVATIVE US/QFL-4036
Heat distortion temperature1.8MPa,未退火,64.0mm跨距5，HDTISO 75-2/Af211 °C
Linear coefficient of thermal expansionTD:-40到40°CASTME8317.4E-05 cm/cm/°C
Heat distortion temperature0.45MPa,未退火,3.20mm，HDTASTM D648224 °C
1.8MPa,未退火,3.20mm，HDTASTM D648216 °C
Linear coefficient of thermal expansionMD:-40到40°CASTME8312.9E-05 cm/cm/°C
TD:-40到40°CISO 11359-27.5E-05 cm/cm/°C

Contact Us

Get App

Top