Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Prime ABS Weather-X ML200 Primex Plastics Corporation
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X ML200 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 220 J/m |
| Supplementary Information | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X ML200 |
|---|---|---|---|
| Temperature | other | 66to79 °C | |
| Demoulding temperature | 77 °C | ||
| Surface Temperature | 163to177 °C |
| hardness | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X ML200 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 102 |
| Mechanical properties | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X ML200 |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 2070 MPa | |
| tensile strength | 屈服 | ASTM D638 | 40.7 MPa |
| bending strength | ASTM D790 | 65.5 MPa |
| optical performance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X ML200 |
|---|---|---|---|
| gloss | 60° | ASTM D523 | 85 |
| physical property | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X ML200 |
|---|---|---|---|
| Shrinkage rate | MD | 0.40to0.80 % | |
| density | ASTM D792 | 1.06 g/cm³ |
| Thermal performance | Test Condition | Test Method | Primex Plastics Corporation/Prime ABS Weather-X ML200 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 87.8 °C |
Contact Us
Get App
Top