Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PMMA ST45G6 LUCITE UK
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | LUCITE UK/ST45G6 |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180/1A | 6.9 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO 179/1eU | 75 kJ/m² | |
| Charpy Notched Impact Strength | ISO 179/1eA | 7.8 kJ/m² |
| hardness | Test Condition | Test Method | LUCITE UK/ST45G6 |
|---|---|---|---|
| Rockwell hardness | M级 | ISO 2039-2 | 30 |
| Mechanical properties | Test Condition | Test Method | LUCITE UK/ST45G6 |
|---|---|---|---|
| tensile strength | ISO 527-2 | 38.0 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | 33 % |
| Flexural modulus | ISO 178 | 1500 MPa | |
| bending strength | ISO 178 | 54.0 MPa |
| optical performance | Test Condition | Test Method | LUCITE UK/ST45G6 |
|---|---|---|---|
| transmissivity | ASTM D1003 | 89.0 % | |
| Haze ratio | ASTM D1003 | 3.0 % | |
| refractive index | ISO 489 | 1.490 |
| flammability | Test Condition | Test Method | LUCITE UK/ST45G6 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| Hot filament ignition temperature | IEC 60695-2-13 | 650 °C |
| physical property | Test Condition | Test Method | LUCITE UK/ST45G6 |
|---|---|---|---|
| Shrinkage rate | 0.40to0.80 % | ||
| melt mass-flow rate | 230°C/3.8kg | ISO 1133 | 3.7 g/10min |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.36 % |
| density | ISO 1183 | 1.15 g/cm³ |
| Thermal performance | Test Condition | Test Method | LUCITE UK/ST45G6 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 84.0 °C |
| Linear coefficient of thermal expansion | MD | ASTME831 | 1.2E-04 cm/cm/°C |
| vicat | -- | ISO 306/B | 82.0 °C |
| -- | ISO 306/A | 94.0 °C |
Contact Us
Get App
Top