Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PBT ElectriPlast® EP-CF/PBT Integral Technologies, Inc.
--
--
Filler, nickel plated carbon fiber
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/PBT |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 59 J/m |
| Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 160 J/m |
| Mechanical properties | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/PBT |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 0.78 % |
| Tensile modulus | ASTM D638 | 3720 MPa | |
| Flexural modulus | ASTM D790 | 8710 MPa | |
| tensile strength | 断裂 | ASTM D638 | 80.0 MPa |
| bending strength | ASTM D790 | 114 MPa |
| Electrical performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/PBT |
|---|---|---|---|
| Surface Resistivity | ESDSTM11.11 | 30 ohms | |
| Volume resistivity | ASTM D257 | 7.5E+02 ohms·cm | |
| ESDSTM11.11 | 300 ohms | ||
| StaticDecay | 内部方法 | 10 msec |
| flammability | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/PBT |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| burning rate | UL 94 | 27 mm/min |
| physical property | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/PBT |
|---|---|---|---|
| density | ASTM D792 | 1.40 g/cm³ |
| Thermal performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-CF/PBT |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 216 °C |
| thermal conductivity | ASTM D5470 | 2.7 W/m/K | |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 2.8E-05 cm/cm/°C |
Contact Us
Get App
Top