Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC+PBT TRILOY® 130 SAMYANG KOREA
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SAMYANG KOREA/TRILOY® 130 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C,3.18mm | ASTM D256 | 690 J/m |
| hardness | Test Condition | Test Method | SAMYANG KOREA/TRILOY® 130 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 115 |
| Mechanical properties | Test Condition | Test Method | SAMYANG KOREA/TRILOY® 130 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 150 % |
| bending strength | 屈服 | ASTM D790 | 88.3 MPa |
| Flexural modulus | ASTM D790 | 2160 MPa | |
| tensile strength | 屈服 | ASTM D638 | 58.8 MPa |
| Electrical performance | Test Condition | Test Method | SAMYANG KOREA/TRILOY® 130 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 5E+16 ohms·cm | |
| Dissipation Factor | ASTM D150 | 9E-03 | |
| dielectric strength | ASTM D149 | 23 kV/mm | |
| dielectric constant | ASTM D150 | 3.00 | |
| arc resistance | ASTM D495 | 118 sec |
| flammability | Test Condition | Test Method | SAMYANG KOREA/TRILOY® 130 |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| physical property | Test Condition | Test Method | SAMYANG KOREA/TRILOY® 130 |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.70to1.2 % |
| melt mass-flow rate | 250°C/3.8kg | ASTM D1238 | 17 g/10min |
| Water absorption rate | 23°C,24hr | ASTM D570 | 0.15 % |
| density | ASTM D792 | 1.21 g/cm³ |
| Thermal performance | Test Condition | Test Method | SAMYANG KOREA/TRILOY® 130 |
|---|---|---|---|
| Heat distortion temperature | 1.8MPa,未退火，HDT | ASTM D648 | 100 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 8.3E-05 cm/cm/°C |
Contact Us
Get App
Top