Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPO/PA GTX-964 BK SABIC INNOVATIVE US
NORYL GTX™
Electrical applications、Industrial machinery
High mobility、dimensional stability 、High temperature resistan、Hydrolysis resistance
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | SABIC INNOVATIVE US/GTX-964 BK |
|---|---|---|---|
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | 45 kJ/m² |
| -30°C | ISO 179/1eA | 20 kJ/m² | |
| Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 20 kJ/m² |
| 23°C | ISO 180/1A | 50 kJ/m² |
| hardness | Test Condition | Test Method | SABIC INNOVATIVE US/GTX-964 BK |
|---|---|---|---|
| ball-indentation hardness | H358/30 | ISO 2039-1 | 80.0 Mpa |
| Mechanical properties | Test Condition | Test Method | SABIC INNOVATIVE US/GTX-964 BK |
|---|---|---|---|
| Tensile modulus | ISO 527-2/1 | 2000 Mpa | |
| tensile strength | 屈服 | ISO 527-2/50 | 50.0 Mpa |
| bending strength | ISO 178 | 70.0 Mpa | |
| Flexural modulus | ISO 178 | 1800 Mpa | |
| Tensile strain | 断裂 | ISO 527-2/50 | 50 % |
| 屈服 | ISO 527-2/50 | 4.0 % | |
| tensile strength | 断裂 | ISO 527-2/50 | 45.0 Mpa |
| physical property | Test Condition | Test Method | SABIC INNOVATIVE US/GTX-964 BK |
|---|---|---|---|
| Melt volume flow rate | 280°C/2.16kg | ISO 1133 | 7.00 cm3/10min |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 1.2 % |
| 饱和,23°C | ISO 62 | 3.5 % | |
| Shrinkage rate | MD2 | 内部方法 | 1.4-1.8 % |
| Thermal performance | Test Condition | Test Method | SABIC INNOVATIVE US/GTX-964 BK |
|---|---|---|---|
| thermal conductivity | ISO 8302 | 0.23 W/m/K | |
| vicat | -- | ISO 306/B120 | 180 °C |
| Linear coefficient of thermal expansion | TD:23到60°C | ISO 11359-2 | 9E-05 cm/cm/°C |
| vicat | -- | ISO 306/A50 | 240 °C |
| Linear coefficient of thermal expansion | MD:23到60°C | ISO 11359-2 | 9E-05 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火,100mm跨距，HDT | ISO 75-2/Be | 175 °C |
| vicat | -- | ISO 306/B50 | 175 °C |
| ball-indentation hardness | 125°C | IEC 60695-10-2 | 通过 |
Contact Us
Get App
Top