Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC G2510 IDEMITSU JAPAN
TARFLON™
Bottle cap,Home appliance components
enhance,Flame retardant
UL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | IDEMITSU JAPAN/G2510 |
---|---|---|---|
Hot deformation temperature | HDT | ASTM D648/ISO 75 | 142 ℃(℉) |
Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000045 mm/mm.℃ |
mechanical properties | Test Condition | Test Method | IDEMITSU JAPAN/G2510 |
---|---|---|---|
Bending modulus | ASTM D790/ISO 178 | 3500 kg/cm²(MPa)[Lb/in²] | |
bending strength | ASTM D790/ISO 178 | 120 kg/cm²(MPa)[Lb/in²] | |
Elongation at Break | ASTM D638/ISO 527 | 5.0 % | |
Rockwell hardness | ASTM D785 | 65 | |
Tensile modulus | ASTM D638/ISO 527 | 3500 kg/cm²(MPa)[Lb/in²] | |
tensile strength | ASTM D638/ISO 527 | 80.0 kg/cm²(MPa)[Lb/in²] |
Electrical performance | Test Condition | Test Method | IDEMITSU JAPAN/G2510 |
---|---|---|---|
Volume resistivity | ASTM D257/IEC 60093 | >1.0E+16 Ω.cm |
other | Test Condition | Test Method | IDEMITSU JAPAN/G2510 |
---|---|---|---|
characteristic | 低粘度 | ||
purpose | 工程 | ||
remarks | 以上加工数据.为参考值.以生产厂商设备的实际状况而进行调整 |
Physical properties | Test Condition | Test Method | IDEMITSU JAPAN/G2510 |
---|---|---|---|
Shrinkage rate | ASTM D955 | 0.40-0.60 % | |
Water absorption rate | ASTM D570/ISO 62 | 0.15 % |