Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
Epoxy FARBOSET® 1115 Cosmic Plastics, Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 21 J/m |
| Supplementary Information | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| Loss factor | 0.0320 |
| hardness | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| Shore hardness | 邵氏D | 97 |
| Electrical performance | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| Surface Resistivity | >1.0E+16 ohms | ||
| dielectric constant | 1kHz | 4.50 | |
| Dissipation Factor | 1kHz | 7E-03 | |
| arc resistance | 180 sec | ||
| dielectric strength | 3.18mm | >16 kV/mm | |
| Volume resistivity | >5.0E+16 ohms·cm |
| Mechanical properties | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| tensile strength | 86.2 MPa | ||
| bending strength | 124 MPa | ||
| Flexural modulus | 17200 MPa | ||
| compressive strength | 276 MPa |
| thermosetting | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| shelf-life | 5°C | 52 wk | |
| 25°C | 1.0 wk | ||
| 35°C | 0.29 wk |
| Uncured Properties | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| Curing Time | 150°C | 0.017to0.050 hr | |
| 150°C8 | 8.3E-03 hr |
| flammability | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| UL flame retardant rating | 1.6mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| Apparent density | 1.00 g/cm³ | ||
| density | 2.04 g/cm³ | ||
| Shrinkage rate | MD | 0.50 % | |
| spiral flow length | 71.0 cm | ||
| Water absorption rate | 23°C,24hr | 0.026 % |
| Thermal performance | Test Condition | Test Method | Cosmic Plastics, Inc./FARBOSET® 1115 |
|---|---|---|---|
| Glass Transition Temperature | 130 °C | ||
| Linear coefficient of thermal expansion | MD：--4 | 3.2E-05 cm/cm/°C | |
| MD：MaximumOperatingTemperature-Intermittent | 200 °C | ||
| MD：--5 | 8.7E-05 cm/cm/°C | ||
| MD：导热系数 | 1.3 W/m/K | ||
| Heat distortion temperature | 1.8MPa,未退火，HDT | 110 °C |
Contact Us
Get App
Top