Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
LDPE HANWHA CLNA-820 Hanwha Chemical
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Hanwha Chemical/HANWHA CLNA-820 |
|---|---|---|---|
| Shore hardness | 邵氏D,1秒 | ASTM D2240 | 52 |
| Mechanical properties | Test Condition | Test Method | Hanwha Chemical/HANWHA CLNA-820 |
|---|---|---|---|
| elongation | 断裂 | ASTM D638 | 650 % |
| tensile strength | ASTM D638 | 16.7 MPa |
| Electrical performance | Test Condition | Test Method | Hanwha Chemical/HANWHA CLNA-820 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | >1.0E+16 ohms·cm | |
| dielectric strength | ASTM D149 | >22 kV/mm | |
| Dissipation Factor | 1MHz | ASTM D150 | <4.0E-4 |
| dielectric constant | 1MHz | ASTM D150 | 2.28 |
| physical property | Test Condition | Test Method | Hanwha Chemical/HANWHA CLNA-820 |
|---|---|---|---|
| density | ASTM D1505 | 0.921 g/cm³ | |
| Environmental stress cracking resistance | 50°C,10%Igepal,F0 | ASTM D1693 | 24.0 hr |
| melt mass-flow rate | 190°C/2.16kg | ASTM D1238 | 0.23 g/10min |
| aging | Test Condition | Test Method | Hanwha Chemical/HANWHA CLNA-820 |
|---|---|---|---|
| Change rate of ultimate elongation in air | 100°C,48hr | ASTM D573 | <-15 % |
| Change rate of tensile strength in air | 100°C,48hr | ASTM D573 | <-15 % |
| Thermal performance | Test Condition | Test Method | Hanwha Chemical/HANWHA CLNA-820 |
|---|---|---|---|
| brittle temperature | ASTM D746 | <-76.0 °C |
Contact Us
Get App
Top