plas
Log In

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PET E7350 TYNE USA
--
--
Glass, mineral 35%,
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

thermal performanceTest ConditionTest MethodTYNE USA/E7350
Hot deformation temperature1.8MPa,UnannealedASTM D648216 °C
1.8MPa,UnannealedASTM D648216
0.45MPa,UnannealedASTM D648249 °C
0.45MPa,UnannealedASTM D648249
mechanical propertiesTest ConditionTest MethodTYNE USA/E7350
Bending modulusASTM D7907580 MPa
bending strengthASTM D790152 MPa
elongationYieldASTM D6382.0 %
elongation at yieldASTM D6382.0 %
Fracture tensile strengthBreakASTM D638103 MPa
Impact strength of cantilever beam gap3.18mmASTM D25664 J/m
Suspended wall beam without notch impact strength3.18mmASTM D256530 J/m
tensile strengthBreakASTM D638103 MPa
Electrical performanceTest ConditionTest MethodTYNE USA/E7350
Dielectric constant1MHzASTM D1503.90
1 MHzASTM D1503.90
Dielectric strength1.57mm,in AirASTM D14921 kV/mm
1.57mm,inAirASTM D14921 kV/mm
Dissipation factor1MHzASTM D1500.020
1 MHzASTM D1500.020
Volume resistivityASTM D2571E+15 ohms·cm
ASTM D2571E+15 ohm.cm
Physical propertiesTest ConditionTest MethodTYNE USA/E7350
densityASTM D7921.38 g/cm3
ASTM D7921.38 g/cm³
Shrinkage rateASTM D9550.20-0.60 %
MDASTM D9550.20to0.60 %
Water absorption rate24hrASTM D5700.080 %
impact performanceTest ConditionTest MethodTYNE USA/E7350
Impact strength of cantilever beam gap3.18mmASTM D25664 J/m
Suspended wall beam without notch impact strength3.18mmASTM D256530 J/m