Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA6 CM1011G30 TORAY SHENZHEN
Amilan®
Automotive sector、Shell
Glass 45% reinforced、High modulus application、High impact、 Glass 45% reinforced、High modulus application、High impact
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Other performance | Test Condition | Test Method | TORAY SHENZHEN/CM1011G30 |
|---|---|---|---|
| Reinforcement Content | 1.9%水｜- wt% |
| Basic performance | Test Condition | Test Method | TORAY SHENZHEN/CM1011G30 |
|---|---|---|---|
| Water absorption rate | 23℃，24小时 | ASTM D-570 | 1.9%水｜- % |
| Mechanical properties | Test Condition | Test Method | TORAY SHENZHEN/CM1011G30 |
|---|---|---|---|
| Flexural strength | 80℃ | ASTM D-790 | 1.9%水｜- kg/cm2 |
| IZOD impact strength | 23℃，V缺口1/2 | ASTM D-256 | 1.9%水｜20 kg·cm/cm |
| 23℃，无缺口1/8 | ASTM D-256 | 无水｜98 kg·cm/cm | |
| Flexural strength | -40℃ | ASTM D-790 | 1.9%水｜- kg/cm2 |
| 23℃ | ASTM D-790 | 1.9%水｜1850 kg/cm2 | |
| Rockwell hardness | 23℃ | ASTM D-785 | 1.9%水｜- R-标度 |
| compressive strength | 23℃ | ASTM D-695 | 1.9%水｜- kg/cm2 |
| Rockwell hardness | 23℃ | ASTM D-785 | 1.9%水｜- M-标度 |
| tensile yield strength | 80℃ | ASTM D-638 | 1.9%水｜- kg/cm2 |
| -40℃ | ASTM D-638 | 1.9%水｜- kg/cm2 | |
| flexural modulus | 80℃ | ASTM D-790 | 1.9%水｜45000 kg/cm2 |
| compressive strength | 80℃ | ASTM D-695 | 1.9%水｜- kg/cm2 |
| elongation at break | 23℃ | ASTM D-638 | 1.9%水｜5 % |
| shearing strength | 23℃ | ASTM D-732 | 1.9%水｜750 kg/cm2 |
| tensile yield strength | 23℃ | ASTM D-638 | 1.9%水｜1300 kg/cm2 |
| IZOD impact strength | -40℃，无缺口1/8 | ASTM D-256 | 1.9%水｜15 kg·cm/cm2 |
| flexural modulus | -40℃ | ASTM D-790 | 1.9%水｜120000 kg/cm2 |
| IZOD impact strength | -40℃，无缺口1/8 | ASTM D-256 | 1.9%水｜15 kg·cm/cm |
| compressive strength | -40℃ | ASTM D-695 | 1.9%水｜- kg/cm2 |
| flexural modulus | 23℃ | ASTM D-790 | 1.9%水｜72000 kg/cm2 |
| Electrical performance | Test Condition | Test Method | TORAY SHENZHEN/CM1011G30 |
|---|---|---|---|
| dielectric strength | 1/8" | ASTM D-149 | 1.9%水｜15 KV/mm |
| dielectric constant | 106Hz | ASTM D-150 | 1.9%水｜4.5 |
| Volume resistivity | ASTM D-257 | 1.9%水｜1012 Ω.cm | |
| arc resistance | 1/8" | ASTM D-495 | 1.9%水｜119 S |
| Loss factor | 106Hz | ASTM D-150 | 1.9%水｜0.06 |
| 50Hz | ASTM D-150 | 1.9%水｜0.16 | |
| dielectric constant | 103Hz | ASTM D-150 | 1.9%水｜7.4 |
| physical property | Test Condition | Test Method | TORAY SHENZHEN/CM1011G30 |
|---|---|---|---|
| density | ASTM D-792 | 1.9%水｜- | |
| Taber wear amount | 1000g,CS-17 | ASTM D-1044 | 1.9%水｜- mg/1000次 |
| Thermal performance | Test Condition | Test Method | TORAY SHENZHEN/CM1011G30 |
|---|---|---|---|
| Coefficient of Linear Thermal Expansion | ASTM D-696 | 1.9%水｜- ×10-5cm/cm/℃ | |
| heat deflection temperature | 4.6kg/cm2 | ASTM D-648 | 1.9%水｜- °C |
| specific heat | 1.9%水｜- Cal/g·℃ | ||
| UL-94 flame retardant grade | 1/32" | UL 94 | 1.9%水｜- |
| melting point | 差示扫描测热计DSC | 225 °C |
Contact Us
Get App
Top