plas

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
POM NW-02 CD3501 JAPAN POLYPLASTIC
DURACON®
Electrical field,Electronic field,Fitness equipment,Automotive sector,Bottle cap
High sliding,wear resistant
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Supplementary InformationTest ConditionTest MethodJAPAN POLYPLASTIC/NW-02 CD3501
ColourNumberCF2001/CD3501
hardnessTest ConditionTest MethodJAPAN POLYPLASTIC/NW-02 CD3501
Rockwell hardnessM-ScaleISO 2039-270
thermal performanceTest ConditionTest MethodJAPAN POLYPLASTIC/NW-02 CD3501
Hot deformation temperature1.8MPa,UnannealedISO 75-2/A85.0 °C
Linear coefficient of thermal expansionMD:23to55°CInternal Method1.2E-04 cm/cm/°C
TD:23to55°CInternal Method1.2E-04 cm/cm/°C
mechanical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/NW-02 CD3501
Bending modulusISO 1782200 Mpa
bending strengthISO 17872.0 Mpa
Friction coefficientDynamic2JISK72180.37
Steel - Dynamic3JISK72180.17
Nominal tensile fracture strainISO 527-220 %
Tensile modulusISO 527-22350 Mpa
tensile strengthISO 527-252.0 Mpa
Wear factor0.98MPa,0.30m/sec4JISK7218<1.0 10^-8mm³/N·m
0.98MPa,0.30m/sec5JISK721819 10^-8mm³/N·m
0.060MPa,0.15m/sec6JISK7218300 10^-8mm³/N·m
0.060MPa,0.15m/sec7JISK72181000 10^-8mm³/N·m
Electrical performanceTest ConditionTest MethodJAPAN POLYPLASTIC/NW-02 CD3501
Dielectric strength3.00mmIEC 60243-120 KV/mm
Surface resistivityIEC 600933E+15 ohms
Volume resistivityIEC 600931E+14 ohms·cm
Physical propertiesTest ConditionTest MethodJAPAN POLYPLASTIC/NW-02 CD3501
melt mass-flow rate190°C/2.16kgISO 113320 g/10min
Melt Volume Flow Rate (MVR)190°C/2.16kgISO 113318.0 cm3/10min
Shrinkage rateTD:2.00mmISO 294-41.8 %
MD:2.00mmISO 294-42.0 %
Water absorption rate23°C,24hrISO 620.70 %
flammabilityTest ConditionTest MethodJAPAN POLYPLASTIC/NW-02 CD3501
UL flame retardant ratingUL 94HB