Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
TPU-PC 20 90A DSM Additive Manufacturing
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | DSM Additive Manufacturing/20 90A |
|---|---|---|---|
| Shore hardness | 邵氏A | ASTM D2240 | 90 |
| Mechanical properties | Test Condition | Test Method | DSM Additive Manufacturing/20 90A |
|---|---|---|---|
| Taber abraser | 1000Cycles,1000g,H-18转轮 | ASTM D1044 | 57.0 mg |
| tensile strength | 100%应变 | ASTM D1708 | 9.83 MPa |
| Flexural modulus | ASTM D790 | 40.7 MPa | |
| tensile strength | 极限 | ASTM D1708 | 40.0 MPa |
| 300%应变 | ASTM D1708 | 26.1 MPa | |
| 50%应变 | ASTM D1708 | 7.46 MPa | |
| elongation | 断裂 | ASTM D1708 | 420 % |
| elastomer | Test Condition | Test Method | DSM Additive Manufacturing/20 90A |
|---|---|---|---|
| tear strength | ASTM D624 | 87.6 kN/m | |
| compression set | 25°C,22hr | ASTM D395 | 15 % |
| physical property | Test Condition | Test Method | DSM Additive Manufacturing/20 90A |
|---|---|---|---|
| density | ASTM D792 | 1.16 g/cm³ | |
| melt mass-flow rate | 224°C/1.2kg | ASTM D1238 | 27 g/10min |
| Thermal performance | Test Condition | Test Method | DSM Additive Manufacturing/20 90A |
|---|---|---|---|
| Glass Transition Temperature | ASTM D3418 | -4.00 °C |
Contact Us
Get App
Top