Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 VESTAMID® L L2128 Altuglas International of Arkema Inc.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L2128 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | NoBreak |
| 23°C | ISO 179/1eU | NoBreak | |
| Charpy Notched Impact Strength | 23°C | ISO 179/1eA | NoBreak |
| -30°C,完全断裂 | ISO 179/1eA | 6.0 kJ/m² |
| Supplementary Information | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L2128 |
|---|---|---|---|
| electrolytic corrosion | IEC 60426 | A1 | |
| ISO Shortcut | ISO 1874 | PA12-P.EHL.22-002 |
| Electrical performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L2128 |
|---|---|---|---|
| Compared to the Leakage Tracking Index (CTI) | SolutionA3 | IEC 60112 | PLC 0 |
| dielectric strength | IEC 60243-1 | 31 kV/mm | |
| Volume resistivity | IEC 60093 | 1E+10 ohms·cm | |
| relative permittivity | 23°C,1MHz | IEC 60250 | 3.80 |
| 23°C,100Hz | IEC 60250 | 17.0 | |
| Dissipation Factor | 23°C,100Hz | IEC 60250 | 0.30 |
| 23°C,1MHz | IEC 60250 | 0.24 | |
| Compared to the Leakage Tracking Index (CTI) | -- | IEC 60112 | PLC 0 |
| Mechanical properties | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L2128 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 230 MPa | |
| Tensile strain | 断裂 | ISO 527-2 | >50 % |
| 屈服 | ISO 527-2 | 45 % | |
| tensile strength | 屈服 | ISO 527-2 | 18.0 MPa |
| flammability | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L2128 |
|---|---|---|---|
| UL flame retardant rating | 3.2mm | UL 94 | HB |
| 1.6mm | UL 94 | HB |
| physical property | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L2128 |
|---|---|---|---|
| density | 23°C | ISO 1183 | 1.05 g/cm³ |
| Shrinkage rate | TD | ISO 294-4 | 1.2 % |
| MD | ISO 294-4 | 0.65 % | |
| Water absorption rate | 平衡,23°C,50%RH | ISO 62 | 0.50 % |
| Thermal performance | Test Condition | Test Method | Altuglas International of Arkema Inc./VESTAMID® L L2128 |
|---|---|---|---|
| melting temperature | ISO 11357-3 | 164 °C | |
| Linear coefficient of thermal expansion | MD：23到55°C | ISO 11359-2 | 1.8E-04 cm/cm/°C |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 70.0 °C |
| 1.8MPa,未退火，HDT | ISO 75-2/A | 40.0 °C | |
| vicat | -- | ISO 306/B | 100 °C |
| -- | ISO 306/A | 145 °C |
Contact Us
Get App
Top