Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PA12 7433 SA01 MED ARKEMA USA
--
Medical and nursing suppl
Low wear
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | ARKEMA USA/7433 SA01 MED |
|---|---|---|---|
| Impact strength of simply supported beam without notch | -30°C | ISO 179/1eU | -- |
| 23°C | ISO 179/1eU | -- |
| hardness | Test Condition | Test Method | ARKEMA USA/7433 SA01 MED |
|---|---|---|---|
| Supporting hardness | 邵氏 D, 15 秒 | ISO 7619-1 | 66 |
| Mechanical properties | Test Condition | Test Method | ARKEMA USA/7433 SA01 MED |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | -- Mpa | |
| Nominal tensile fracture strain | ISO 527-2 | -- % | |
| Tensile stress | 断裂 | ISO 527-2 | 46.0 Mpa |
| 屈服 | ISO 527-2 | -- Mpa | |
| Tensile strain | 屈服 | ISO 527-2 | -- % |
| abrasion resistance | ISO 4649 | 40.5 mm³ |
| squeeze out | Test Condition | Test Method | ARKEMA USA/7433 SA01 MED |
|---|---|---|---|
| drying temperature | 70 到 80 °C | ||
| drying time | 5.0 到 7.0 hr | ||
| Melt Temperature | 220 到 250 °C |
| physical property | Test Condition | Test Method | ARKEMA USA/7433 SA01 MED |
|---|---|---|---|
| Water absorption rate | 平衡, 23°C, 50% RH | ISO 62 | 0.76 % |
| Shrinkage rate | 流量 | ISO 294-4 | 0.20 % |
| Water absorption rate | 饱和, 23°C | ISO 62 | 1.4 % |
| Shrinkage rate | 横向流量 | ISO 294-4 | 0.70 % |
| Thermal performance | Test Condition | Test Method | ARKEMA USA/7433 SA01 MED |
|---|---|---|---|
| Heat distortion temperature | 0.45 MPa, 未退火 | ISO 75-2/B | 67.0 °C |
| Melting temperature 2 | ISO 11357-3 | 174 °C | |
| Heat distortion temperature | 1.8 MPa, 未退火 | ISO 75-2/A | 113 °C |
| vicat | ISO 306/B50 | 129 °C |
| injection | Test Condition | Test Method | ARKEMA USA/7433 SA01 MED |
|---|---|---|---|
| Temperature | 25 到 60 °C | ||
| Processing (melt) temperature | 230 到 290 °C | ||
| drying temperature | 70 到 80 °C | ||
| drying time | 5.0 到 7.0 hr |
Contact Us
Get App
Top