Log In | Sign Up
CategoriesAll
Plastic Raw Materials
Modified Plastics
Plastic Additives
Color Masterbatch
Plastic Datasheets
Plastic News
About Us

Material Comparison

Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC Durolon® VR2000 UNIGEL BRAZIL
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--

Plastic Datasheets

Impact resistanceTest ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
Impact strength of cantilever beam gap3.20mmASTM D256780 J/m
hardnessTest ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
Rockwell hardnessM级ASTM D78575
R级ASTM D785120
Mechanical propertiesTest ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
Flexural modulusASTMD7902350 MPa
elongation断裂ASTMD638100 %
Tensile modulusASTMD6382300 MPa
tensile strength 断裂ASTMD63868.0 MPa
屈服ASTMD63863.0 MPa
bending strengthASTMD79093.0 MPa
Electrical performanceTest ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
Dissipation Factor60HzASTM D1506.6E-04
dielectric constant60HzASTM D1502.91
Volume resistivityASTM D2571E+16 ohms·cm
Dissipation Factor1MHzASTM D1509.2E-03
dielectric constant1MHzASTM D1502.85
dielectric strength1.60mmASTM D14929 kV/mm
arc resistanceASTM D495110 sec
optical performance Test ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
refractive indexASTMD5421.586
transmissivityASTM D100389.0 %
flammabilityTest ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
Hot filament ignition temperature3.2mmIEC 60695-2-13960 °C
UL flame retardant rating1.5mmUL 94HB
physical property Test ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
Shrinkage rateMDASTM D9550.50to0.70 %
densityASTMD7921.20 g/cm³
melt mass-flow rate300°C/1.2kgASTMD123817 g/10min
Water absorption rate23°C,24hrASTM D5700.23 %
Thermal performanceTest ConditionTest MethodUNIGEL BRAZIL/Durolon® VR2000
Heat distortion temperature1.8MPa,未退火，HDTASTMD648132 °C
Linear coefficient of thermal expansionMDASTM D6966.5E-05 cm/cm/°C

Contact Us

Get App

Top