Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PP ElectriPlast® EP-SS/PP Integral Technologies, Inc.
--
--
Filler, stainless steel fiber
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-SS/PP |
---|---|---|---|
Impact strength of cantilever beam gap | 23°C | ASTM D256 | 79 J/m |
Suspended wall beam without notch impact strength | 23°C | ASTM D256 | 370 J/m |
Mechanical properties | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-SS/PP |
---|---|---|---|
elongation | 断裂 | ASTM D638 | 19 % |
Tensile modulus | ASTM D638 | 2290 MPa | |
tensile strength | 断裂 | ASTM D638 | 21.0 MPa |
Flexural modulus | ASTM D790 | 2110 MPa | |
bending strength | ASTM D790 | 33.0 MPa |
Electrical performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-SS/PP |
---|---|---|---|
Surface Resistivity | ESDSTM11.11 | 52 ohms | |
Volume resistivity | ASTM D257 | 16 ohms·cm | |
ESDSTM11.11 | 5.0 ohms | ||
StaticDecay | 内部方法 | 10 msec |
flammability | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-SS/PP |
---|---|---|---|
UL flame retardant rating | UL 94 | HB | |
burning rate | UL 94 | <16 mm/min |
physical property | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-SS/PP |
---|---|---|---|
density | ASTM D792 | 1.29 g/cm³ |
Thermal performance | Test Condition | Test Method | Integral Technologies, Inc./ElectriPlast® EP-SS/PP |
---|---|---|---|
Heat distortion temperature | 1.8MPa,未退火,HDT | ASTM D648 | 65.0 °C |
Contact Us
Get App
Top