Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
ABS Polifil® ABS GFABS-30 美国The Plastics
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | 美国The Plastics/Polifil® ABS GFABS-30 |
|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256 | 53 J/m |
| Dart impact | 23°C,12.7mm | ASTM D3029 | 0.452 J |
| hardness | Test Condition | Test Method | 美国The Plastics/Polifil® ABS GFABS-30 |
|---|---|---|---|
| Rockwell hardness | R级 | ASTM D785 | 118 |
| Mechanical properties | Test Condition | Test Method | 美国The Plastics/Polifil® ABS GFABS-30 |
|---|---|---|---|
| bending strength | 23°C | ASTM D790 | 116 MPa |
| tensile strength | 23°C | ASTM D638 | 89.6 MPa |
| Tensile modulus | 23°C | ASTM D638 | 6270 MPa |
| Flexural modulus | 23°C | ASTM D790 | 6410 MPa |
| elongation | 屈服,23°C | ASTM D638 | 2.0 % |
| 断裂,23°C | ASTM D638 | 2.0 % |
| physical property | Test Condition | Test Method | 美国The Plastics/Polifil® ABS GFABS-30 |
|---|---|---|---|
| Water absorption rate | 24hr | ASTM D570 | 0.15 % |
| melt mass-flow rate | 230°C/2.16kg | ASTM D1238 | 3.0to10 g/10min |
| density | ASTM D792 | 1.28 g/cm³ | |
| Shrinkage rate | MD：3.18mm | ASTM D955 | 0.20 % |
| Thermal performance | Test Condition | Test Method | 美国The Plastics/Polifil® ABS GFABS-30 |
|---|---|---|---|
| Hot deformation temperature (HDT) | 1.8MPa,未退火，HDT | ASTM D648 | 100 °C |
| 0.45MPa,未退火，HDT | ASTM D648 | 107 °C |
Contact Us
Get App
Top