Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

PC EGN-2020R2 9001 MITSUBISHI ENGINEERING JAPAN
IUPILON™
Fiber grade
enhance,Flame retardant,Filler: Glass fiber reinf,20% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
thermal performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020R2 9001 |
---|---|---|---|
Hot deformation temperature | 0.45MPa,Unannealed | ISO 75-2/B | 146 °C |
1.8MPa,Unannealed | ISO 75-2/A | 144 °C | |
Linear coefficient of thermal expansion | TD | ISO 11359-2 | 6.3E-05 cm/cm/°C |
MD | ISO 11359-2 | 2.6E-05 cm/cm/°C |
mechanical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020R2 9001 |
---|---|---|---|
Bending modulus | ISO 178 | 5700 Mpa | |
bending strength | ISO 178 | 153 Mpa | |
Tensile modulus | ISO 527-2 | 6200 Mpa | |
Tensile strain | Break | ISO 527-2 | 4.0 % |
tensile strength | Break | ISO 527-2 | 104 Mpa |
Electrical performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020R2 9001 |
---|---|---|---|
Compared to the anti leakage trace index | CTI | UL 746 | PLC 3 |
Physical properties | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020R2 9001 |
---|---|---|---|
Shrinkage rate | MD:3.20mm | 0.10-0.30 % | |
TD:3.20mm | 0.30-0.50 % | ||
Water absorption rate | Saturation,23°C | ISO 62 | 0.11 % |
impact performance | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020R2 9001 |
---|---|---|---|
Impact strength of simply supported beam without notch | 23°C | ISO 179 | 60 kJ/m² |
flammability | Test Condition | Test Method | MITSUBISHI ENGINEERING JAPAN/EGN-2020R2 9001 |
---|---|---|---|
UL flame retardant rating | 0.75mm | UL 94 | V-2 |
1.5mm | UL 94 | V-0 |