Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS ABS L3FR ELIX Polymers, S. L.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
Impact resistance | Test Condition | Test Method | ELIX Polymers, S. L./ABS L3FR |
---|---|---|---|
Suspended wall beam without notch impact strength | -30°C | ISO 180/1U | 40 kJ/m² |
23°C | ISO 180/1U | 60 kJ/m² | |
Impact strength of cantilever beam gap | -30°C | ISO 180/1A | 4.0 kJ/m² |
23°C | ISO 180/1A | 8.0 kJ/m² |
hardness | Test Condition | Test Method | ELIX Polymers, S. L./ABS L3FR |
---|---|---|---|
ball-indentation hardness | ISO 2039-1 | 105 MPa |
Electrical performance | Test Condition | Test Method | ELIX Polymers, S. L./ABS L3FR |
---|---|---|---|
relative permittivity | 23°C,1MHz | IEC 60250 | 3.00 |
Volume resistivity | 23°C | IEC 60093 | 1E+17 ohms·cm |
relative permittivity | 23°C,100Hz | IEC 60250 | 3.00 |
Surface Resistivity | IEC 60093 | 1E+15 ohms | |
Compared to the Leakage Tracking Index (CTI) | 解决方案A | IEC 60112 | PLC 1 |
Dissipation Factor | 23°C,100Hz | IEC 60250 | 7E-03 |
23°C,1MHz | IEC 60250 | 8E-03 |
Mechanical properties | Test Condition | Test Method | ELIX Polymers, S. L./ABS L3FR |
---|---|---|---|
tensile strength | 屈服,23°C | ISO 527-2/50 | 42.0 MPa |
Tensile modulus | 23°C | ISO 527-2/1 | 2400 MPa |
flammability | Test Condition | Test Method | ELIX Polymers, S. L./ABS L3FR |
---|---|---|---|
Hot filament ignition temperature | 2.00mm | IEC 60695-2-13 | 960 °C |
UL flame retardant rating | 1.60mm | UL 94 | V-0 |
physical property | Test Condition | Test Method | ELIX Polymers, S. L./ABS L3FR |
---|---|---|---|
Melt volume flow rate | 220°C/10.0kg | ISO 1133 | 50.0 cm³/10min |
density | ISO 1183 | 1.19 g/cm³ |
Thermal performance | Test Condition | Test Method | ELIX Polymers, S. L./ABS L3FR |
---|---|---|---|
Linear coefficient of thermal expansion | MD:23到55°C | ISO 11359-2 | 9E-05 cm/cm/°C |
Contact Us
Get App
Top