Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PPS D5110 CELANESE USA
FORTRON®
Automotive Applications,Electrical applications
Glass fiber reinforced,High temperature resistan
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Impact resistance | Test Condition | Test Method | CELANESE USA/D5110 |
|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | ISO 179 | 14 kJ/m² |
| Mechanical properties | Test Condition | Test Method | CELANESE USA/D5110 |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 14600 Mpa | |
| bending strength | ISO 178 | 150 Mpa | |
| Tensile strain | 断裂 | ISO 527-2 | 0.80 % |
| Flexural modulus | ISO 178 | 14000 Mpa | |
| tensile strength | ISO 527-2 | 90.0 Mpa |
| Electrical performance | Test Condition | Test Method | CELANESE USA/D5110 |
|---|---|---|---|
| Volume resistivity | ASTM D257 | >3.0E+16 ohms·cm | |
| Surface Resistivity | ASTM D257 | >2.0E+14 ohms |
| flammability | Test Condition | Test Method | CELANESE USA/D5110 |
|---|---|---|---|
| UL flame retardant rating | 1.5mm | UL 94 | V-0 |
| physical property | Test Condition | Test Method | CELANESE USA/D5110 |
|---|---|---|---|
| Shrinkage rate | TD | ISO 294-4 | 0.70 % |
| MD | ISO 294-4 | 0.30 % |
| Thermal performance | Test Condition | Test Method | CELANESE USA/D5110 |
|---|---|---|---|
| ThermalDiffusivity | ASTM D790/ISO 178 | 0.0126 cm²/s | |
| thermal conductivity | ASTM D790/ISO 178 | 2.0 W/m/K | |
| Heat distortion temperature | 0.45MPa,未退火，HDT | ISO 75-2/B | 280 °C |
| Linear coefficient of thermal expansion | MD:-30到30°C | ASTM D696 | 1.6E-05 cm/cm/°C |
| Heat distortion temperature | 1.8MPa,未退火，HDT | ISO 75-2/A | 260 °C |
| specific heat | ASTM D790/ISO 178 | 1100 J/kg/°C | |
| Linear coefficient of thermal expansion | TD:-30到30°C | ASTM D696 | 2E-05 cm/cm/°C |
Contact Us
Get App
Top