Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

ABS/PA NG-02 UV INEOS STYRO KOREA
Terblend®N
sporting goods,Automotive sector
UV resistance,dimensional stability ,Filler: Glass fiber reinf,8.0% filler by weight
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
hardness | Test Condition | Test Method | INEOS STYRO KOREA/NG-02 UV |
---|---|---|---|
Ball Pressure Test | ISO 2039-1 | 95.0 Mpa |
thermal performance | Test Condition | Test Method | INEOS STYRO KOREA/NG-02 UV |
---|---|---|---|
Hot deformation temperature | 1.8MPa,Annealed | ISO 75-2/A | 80.0 °C |
0.45MPa,Annealed | ISO 75-2/B | 105 °C | |
Linear coefficient of thermal expansion | MD | ISO 11359-2 | 6E-05 cm/cm/°C |
Vicat softening temperature | -- | ISO 306/B50 | 108 °C |
-- | ISO 306/A50 | 170 °C |
film | Test Condition | Test Method | INEOS STYRO KOREA/NG-02 UV |
---|---|---|---|
elongation | Break | ISO 527-3 | 4.0 % |
mechanical properties | Test Condition | Test Method | INEOS STYRO KOREA/NG-02 UV |
---|---|---|---|
Bending modulus | ISO 178 | 2800 Mpa | |
bending strength | ISO 178 | 80.0 Mpa | |
Tensile modulus | ISO 527-2 | 3200 Mpa | |
Tensile strain | Yield,23°C | ISO 527-2 | 3.0 % |
tensile strength | Yield,23°C | ISO 527-2 | 50.0 Mpa |
Electrical performance | Test Condition | Test Method | INEOS STYRO KOREA/NG-02 UV |
---|---|---|---|
Dielectric constant | 100Hz | IEC 60250 | 3.40 |
Dissipation factor | 1MHz | IEC 60250 | 0.013 |
Surface resistivity | IEC 60093 | 1E+14 ohms | |
Volume resistivity | IEC 60093 | 1E+15 ohms·cm |
Physical properties | Test Condition | Test Method | INEOS STYRO KOREA/NG-02 UV |
---|---|---|---|
Melt Volume Flow Rate (MVR) | 240°C/10.0kg | ISO 1133 | 30.0 cm3/10min |
impact performance | Test Condition | Test Method | INEOS STYRO KOREA/NG-02 UV |
---|---|---|---|
Impact strength of simply supported beam without notch | -30°C | ISO 179 | 25 kJ/m² |
23°C | ISO 179 | 35 kJ/m² |