Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates
PC ML-5206ZLP TEIJIN JAPAN
PANLITE®
Casters、Fitness equipment
Thermal stability、transparent
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| Thermal Properties | Test Condition | Test Method | TEIJIN JAPAN/ML-5206ZLP |
|---|---|---|---|
| Linear thermal expansion coefficient | MD | ISO11359-2 | 7E-05 cm/cm/°C |
| Evolution Calendar intelligent importer | 1.5mm | UL746 | 125 °C |
| Heat Deflection Temperature | 线膨胀系数，MD | ISO 11359-2 | 0.7 X10-4/℃ |
| Flame retardancy | 1.5mmt | UL94 | V-0 |
| RTIElec | 1.5mm | UL746 | 130 °C |
| Heat Deflection Temperature | TD | ISO 11359-2 | 0.7 X10-4/℃ |
| 1.8MPa,未退火 | ISO75-2/A | 122 °C | |
| Linear thermal expansion coefficient | TD | ISO11359-2 | 7E-05 cm/cm/°C |
| RTI | 1.5mm | UL746 | 130 °C |
| Heat Deflection Temperature | 1.80MPa | ISO 75-1,2 | 122 °C |
| Physical | Test Condition | Test Method | TEIJIN JAPAN/ML-5206ZLP |
|---|---|---|---|
| Modeling Shrinkage | MD | In-house method | 0.5-0.7 % |
| TD | 0.5-0.7 % | ||
| Melt Mass-Flow Rate | 300℃ | ISO 1133 | 3.5 cm310min |
| Melt Volume flow Rate | 300°C/1.2kg | ISO1133 | 3.50 cm3/10min |
| Modeling Shrinkage | TD:4.00mm | 内部方法 | 0.50到0.70 % |
| MD:4.00mm | 0.50到0.70 % | ||
| Moisture Absorption | 23°C,24hr | ISO62 | 0.20 % |
| Mechanical Properties | Test Condition | Test Method | TEIJIN JAPAN/ML-5206ZLP |
|---|---|---|---|
| Notched Impact Strength | Notched | ISO 179 | 8.0 kJ/m² |
| Flexural Strength | 2mm/min | ISO 178 | 98 Mpa |
| Tensile Elongation?(Break) | 50mm/min | ISO 527-1 | 25 % |
| Tensile Strength(Yield) | ISO 527-1,2 | 65 Mpa | |
| Tensile Stress | 断裂 | ISO527-2/50 | 53.0 Mpa |
| Tensile Modulus | ISO527-2/1 | 2400 Mpa | |
| Nominal Tensile Strain at Break | ISO527-2/50 | 25 % | |
| Flexural Modulus | ISO178 | 2400 Mpa | |
| Tensile Stress | 屈服 | ISO527-2/50 | 65.0 Mpa |
| Tensile Strain | 6.0 % | ||
| Tensile Strength(Break) | 50mm/min | ISO 527-1 | 53 Mpa |
| Flexural Stress | ISO178 | 98.0 Mpa | |
| Flexural Modulus | 2mm/min | ISO 178 | 2400 Mpa |
| Optical | Test Condition | Test Method | TEIJIN JAPAN/ML-5206ZLP |
|---|---|---|---|
| Particle Size Distribution | 2.0mmt | In-house method | 17 % |
| Transmittance | 1.5mmt | JIS K7136 | 85 % |
| 3000µm | ASTMD1003 | 77.0 % |
| Impact Properties | Test Condition | Test Method | TEIJIN JAPAN/ML-5206ZLP |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 23°C | ISO179 | 无断裂 |
| Flammability | Test Condition | Test Method | TEIJIN JAPAN/ML-5206ZLP |
|---|---|---|---|
| Glow Wire Ignition Temperature | 3.0mm | IEC60695-2-13 | 875 °C |
| Glow Wire Flammability Index | 1.5mm | IEC60695-2-12 | 960 °C |
| Flame Rating | UL94 | V-0 | |
| Glow Wire Flammability Index | 3.0mm | IEC60695-2-12 | 960 °C |
| Glow Wire Ignition Temperature | 1.5mm | IEC60695-2-13 | 875 °C |
| Electrical Properties | Test Condition | Test Method | TEIJIN JAPAN/ML-5206ZLP |
|---|---|---|---|
| Volume Resistivity | IEC60093 | >1.0E+15 ohms·cm | |
| Comparative Tracking Index | IEC60112 | 250 V | |
| Surface Resistivity | IEC60093 | >1.0E+15 ohms |
Contact Us
Get App
Top