Material Comparison
Product Info
Product Name
Brand Name
Usages
Properties
Certificates

Epoxy Ad-Tech Epoxy EL-315-IHL Ad-Tech Plastic Systems Corp.
--
Laminated board
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Plastic Datasheets
| hardness | Test Condition | Test Method | Ad-Tech Plastic Systems Corp./Ad-Tech Epoxy EL-315-IHL |
|---|---|---|---|
| Shore hardness | ShoreD | ASTM D2240 | 87 |
| thermal performance | Test Condition | Test Method | Ad-Tech Plastic Systems Corp./Ad-Tech Epoxy EL-315-IHL |
|---|---|---|---|
| Hot deformation temperature | 1.8MPa,Unannealed | ASTM D648 | 245 °C |
| Linear coefficient of thermal expansion | MD | ASTM D696 | 1.9E-05 cm/cm/°C |
| mechanical properties | Test Condition | Test Method | Ad-Tech Plastic Systems Corp./Ad-Tech Epoxy EL-315-IHL |
|---|---|---|---|
| Bending modulus | ASTM D790 | 9860 MPa | |
| compressive strength | ASTM D695 | 99.1 MPa | |
| elongation | Yield | ASTM D638 | 0.40 % |
| Tensile modulus | ASTM D638 | 13800 MPa | |
| tensile strength | Break | ASTM D638 | 181 MPa |
| thermosetting | Test Condition | Test Method | Ad-Tech Plastic Systems Corp./Ad-Tech Epoxy EL-315-IHL |
|---|---|---|---|
| Thermosetting components | Hardener | 按重量计算的混合比:25按容量计算的混合比:24 | |
| Resin | 按重量计算的混合比:100按容量计算的混合比:100 | ||
| Thermosetting mixed viscosity | ASTM D2393 | 5000 cP |
| Physical properties | Test Condition | Test Method | Ad-Tech Plastic Systems Corp./Ad-Tech Epoxy EL-315-IHL |
|---|---|---|---|
| Shrinkage rate | MD | ASTM D955 | 0.15 % |